2002 Ford Explorer Sport Owner Guide 6th Printing - Page 119

Controls and features Activating the memory seat feature To activate this feature: 1. Position the seat to the position you desire. 2. Press the SET control on the driver's door panel. 3. Within 5 five seconds, press one control on the remote transmitter and then press the 1 or 2 control on the driver's door panel to which you would like to associate with the seat and Driver 1 or Driver 2 positions. 4. Repeat this procedure for another remote transmitter if desired. SET 1 2 Deactivating the memory seat feature To deactivate this feature: 1. Press the SET control on the driver's door panel. 2. Within 5 five seconds, press any control on the remote transmitter which you would like to deactivate and then press the SET control on the driver's door panel. 3. Repeat this procedure for another remote transmitter if desired. Replacing the battery The remote transmitter is powered by one coin type three-volt lithium battery CR2032 or equivalent. Typical operating range will allow you to be up to 10 meters (33 feet) away from your vehicle. A decrease in operating range can be caused by the following factors: • Weather conditions • Nearby radio towers • Structures around the vehicle • Other vehicles parked next to the vehicle 119