2002 Ford Explorer Owner's Manual - Page 160
2002 Ford Explorer Manual
Page 160 highlights
Maintenance and Specifications 8. Remove the dipstick and inspect the fluid level. Level should be in the cross-hatched area. 9. If necessary, add fluid in 250ml (1/2 pint) increments through the filler tube until the level is correct at normal operating temperatures. Refer to the Lubricant Specifications section in this chapter for the correct fluid type. The use of any other non-approved fluid may cause internal transmission damage. 10. Fluid can be checked at ambient temperatures between 10-30°C (50-95°F). DO NOT ADD fluid until the transmission is at normal operating temperatures or the transmission will be overfilled. Low fluid level Do not drive the vehicle if the fluid level is at or below the bottom of the dipstick. High fluid level Fluid levels above the safe range may cause overheating, shift and/or engagement concerns and internal transmission damage. If an overfill condition occurs, excess fluid should be removed by a qualified technician. 160