2005 Ford Explorer Sport Trac Owner Guide 3rd Printing - Page 85

Locks and Security Unlocking and locking the doors using keyless entry keypad To unlock the driver's door, enter the factory set 5-digit code or your personal code. Each number must be pressed within five seconds of each other. Note: The driver's door will unlock and the interior lamps will illuminate after the factory set 5-digit code or your personal code are correctly entered. To unlock all doors, press the 3 • 4 control within five seconds. To lock all doors, press the 7 • 8 and the 9 • 0 at the same time. You do not need to enter the keypad code first. Note: The interior lamps will turn off. Autolock (if equipped) This feature will automatically lock all the doors when: • all the doors are closed, • the ignition is in the 4 (ON) position, • the gearshift lever is shifted into, then out of, R (Reverse) and then • the brake pedal is released. This feature will also automatically relock all the doors when: • the ignition is in the 4 (ON) position and any door is opened then closed, and • you put the vehicle in motion by releasing the brake pedal. Deactivating/reactivating the autolock feature The autolock feature can be deactivated/reactivated using the following two methods: • keyless entry keypad, or • ignition lock cylinder and interior power door locks control. To deactivate/reactivate the autolock feature using the keypad Your vehicle comes with the autolock feature activated. To deactivate/reactivate this feature: 1. Turn the ignition to the 3 (OFF) position. 2. Close all the doors. 3. Enter the 5-digit entry code. 4. Press and hold the 7 • 8. While holding the 7 • 8, press the 3 • 4 within five seconds. 85 2005 Explorer Sport Trac (p27) Owners Guide (post-2002-fmt) USA (fus)