2008 Ford Expedition Owner Guide 2nd Printing (Spanish) - Page 540

Lights Replacing license plate lamp bulb The license plate bulbs are located in the license plate housing assembly on the liftgate. To change the license plate bulbs: 1. Make sure the headlamp switch is in the "O" position. 2. Remove the license lamp screw from the assembly. 3. Pull the lamp down and twist the bulb socket counterclockwise. Remove the bulb socket from the lamp. 4. Pull out the old bulb and push in the new bulb. 5. Install the bulb socket in the lamp assembly by turning it clockwise. 6. Install the lamp assembly and secure it with the retaining screw. Approach lamp/mirror turn signal bulb removal (if equipped) To change the bulbs: 1. Make sure the headlamp switch is in the "O" position and then fold the mirror forward. 2. Press the clip and pull the turn signal lens down to remove it from the mirror assembly. 3. Disconnect the bulb assembly from the lens. 4. Remove and replace the bulb. 5. Align the turn signal lens clip with the slot in the mirror assembly and carefully press the lens in. 100 2008 Expedition (exd) Owners Guide (post-2002-fmt) USA (fus)