2010 Ford Explorer Sport Trac Owner Guide 1st Printing - Page 101

Driver Controls Activating Cargo Cage Theft Deterrent Device: The following procedure can be done with the cargo cage in the stowed or extended position. 1. Locate the Phillips head screw in the middle of the vertical brace on the locking clip. 2. Turn the screw counterclockwise until you hear an audible click. 3. To deactivate, turn the screw clockwise until the locking clip moves freely. To remove the cargo cage: 1. Extend the cargo cage. 2. Pull the lever on each side of the cage to unlock it. Make sure the locking clip screws are loose before removing the cargo cage. 3. Press the locking clips below the middle bar and lift the cargo cage out of the channels on the "D" pillar. To install the cargo cage, follow the removal procedure in reverse order. TONNEAU COVER (IF EQUIPPED) The tonneau cover has been designed to maximize fuel economy and should be fully installed whenever possible. The rear panel can be folded in half and secured behind the cab, or the whole cover can be removed completely from the vehicle. To avoid damage to the cover, do not operate the vehicle unless the cover is fully installed and securely latched, or securely stowed. To avoid damage to the cover, do not stand, sit or load anything on top of the cover. The tonneau cover has been designed to be a water resistant system. A small amount of water may drain into the pickup box with the cover installed. 101 2010 07+ Explorer Sport Trac (esp) Owners Guide (own2002), 1st Printing USA (fus)