2010 Ford Explorer Sport Trac Owner Guide 1st Printing - Page 22

Instrument Cluster The following setup features are available: SYSTEM CHECK HOLD RESET Press and hold the SELECT/RESET stem to select system check when this is displayed in the message center. The message center will cycle through each of the systems being monitored. For each of the monitored systems, the message center will indicate either an OK message or a warning message for two seconds. Pressing the SELECT/RESET stem cycles the message center through each of the systems being monitored. The sequence of the system check report and how it appears in the message center is as follows: 1. OIL LIFE 2. CHARGING SYSTEM 3. WASHER FLUID 4. DOOR AJAR 5. EXTERIOR LAMP 6. BRAKE FLUID LEVEL 7. PARK BRAKE 8. MILES TO EMPTY 9. FUEL LEVEL LOW (will only display if 50 miles [80 km] or less to empty) AWD AUTO / LOCKED (4.6L engine vehicles only) This displays the AWD locked function. 1. Press and hold the SELECT/RESET stem within four seconds to turn the AWD system to the auto / locked mode. 2. Press the SELECT/RESET stem for the next setup menu item or wait for more than four seconds to return to the info menu. Note: When the AWD system is in the LOCKED mode, the 4X4 indicator will be illuminated. UNITS Displays the current units in English or Metric. 1. Press and hold the SELECT/RESET stem to change from English to Metric. 2. Press the SELECT/RESET stem for the next setup menu item or wait for more than four seconds to return to the info menu. 22 2010 07+ Explorer Sport Trac (esp) Owners Guide (own2002), 1st Printing USA (fus)