2010 Ford Ranger Regular Cab Owner Guide 2nd Printing - Page 180

Driving • 4x4 LOW - Momentarily illuminates when the vehicle is started. Illuminates when 4L (4WD Low) is engaged. 4x4 LOW Using the electronic shift 4WD 4H system 2H 4L 2H (2WD High) - Power to the rear wheels only; used for street and highway driving. 4H (4WD High) - Used for extra traction such as in snow or icy roads or in off-road situations. Not intended for use on dry pavement. 4L (4WD Low) - Uses extra gearing to provide maximum power to all four wheels. Intended only for off-road applications such as deep sand, steep grades or pulling heavy objects. 4L (4WD Low) will not engage while the vehicle is moving; this is normal and should be no reason for concern. Refer to Shifting to/from 4L (4WD Low) for proper operation. Shifting between 2H (2WD High) and 4H (4WD High) • Move the 4WD control between 2H and 4H at a stop or any forward speed. Note: Do not perform this operation if the rear wheels are slipping. Shifting to/from 4L (4WD Low) Note: Some noise may be heard as the 4WD system shifts or engages. This is normal and should be no reason for concern. 1. Bring the vehicle to a complete stop 2. On vehicles equipped with an automatic transmission, place the transmission in N (Neutral); on vehicles equipped with a manual transmission, press the clutch. 3. Move the 4WD control to the desired position. • If shifting into 4L (4WD Low), wait for the 4WD LOW light in the instrument cluster to turn on indicating the shift is complete. • If shifting out of 4L (4WD Low), wait for the 4WD LOW light in the instrument cluster to turn off indicating the shift is complete. 180