2011 Ford F450 Super Duty Crew Cab Owner Guide 4th Printing - Page 119

Driver Controls Switch position 1 2 3 4 Up, on L L L L or + Middle, neutral M M M M or 0 Down, R R R R off or - L=left; M=middle; R=right 5 L M R 6 L M R 7 L M R 8 L M R 9 L M R 10 L M R 11 L M R 12 L M R 3. To input these positions into the Car2U௡ system, simultaneously press all three Car2U௡ system buttons for a few seconds and then release to put the device into programming mode. The indicator lights will blink slowly. Within 2.5 minutes enter your corresponding DIP switch settings from left to right into your Car2U௡ system by pressing and releasing the buttons corresponding to the settings you circled. 4. After inputting switch settings, simultaneously press and release all three Car2U௡ system buttons. The indicator lights will turn on. 5. Press and hold the Car2U௡ system button you would like to use to control the garage door. Immediately (within 1 second) release the button once the garage door moves. During this time the selected button indicator light will blink slowly. Do not release the button until you see the garage door move. Most garage doors open quickly. You may need to hold the button from 5-55 seconds before observing movement of the garage door. 6. The indicator light will (begin to) blink rapidly until programming is complete. If your garage door opener does not operate following these steps, repeat Steps 2 through 6. Otherwise, call the toll-free Car2U௡ help line at 1-866-57Car2U (1-866-572-2728). 119 2011 F-250/350/450/550 (f23) Owners Guide, 4th Printing USA (fus)