2011 Ford Mustang Owner Guide 3rd Printing - Page 55
2011 Ford Mustang Manual
Page 55 highlights
Lights The autolamp system also keeps the lights on for a predetermined amount of time after the ignition switch is turned to off. You can change the amount of time the lamps stay on by using the programming procedure that follows: Note: If the vehicle is equipped with autolamps, it will have the headlamps on with windshield wipers feature. If the windshield wipers are turned on, the exterior lamps will turn on with the headlamp control in the autolamp position. Autolamps - programmable exit delay Programmable exit delay allows the length of the autolamp exit delay to be changed. To program the auto lamp exit time delay: 1. Start with the ignition off and the headlamp control in the autolamp position. 2. Turn the headlamp control to off. 3. Turn the ignition on and then back to off. 4. Turn the headlamp control to the autolamp position. The headlamps will turn on. 5. Wait the desired amount of time for the exit delay you want (up to three minutes), then turn the headlamps off. You can also use the message center to program the autolamp exit time delay. See Message center in the Instrument Cluster chapter. Fog lamp control (if equipped) The fog lamps can be turned on when the ignition is in the on position, the headlamp control is in or position and the the high beams are not on. Pull the headlamp control towards you to turn on the fog lamps. The indicator light under the fog lamp symbol will illuminate. 55 2011 05+ Mustang (197) Owners Guide, 3rd Printing USA (fus)