2014 Ford E250 Cargo Owner Manual Printing 1 - Page 59
2014 Ford E250 Cargo Manual
Page 59 highlights
58 Locks Memory Lock If you lock your doors with the power lock control or the remote control while the sliding door is open, the door will automatically lock after it is closed. Autolock and Unlock Note: Your vehicle comes with this feature disabled. The autolock feature will lock all the doors when: • all doors are closed, • the ignition is on, • you shift into any gear putting the vehicle in motion, and • the vehicle attains a speed greater than 12 mph (20 km/h). If the vehicle was autolocked, the autounlock feature will unlock all doors when the driver's door is opened within 10 minutes of switching the ignition off. Enabling or Disabling Autolock and Autounlock These features can be enabled or disabled: • by your authorized dealer • through the information display • using the power door lock procedure. To enable or disable using the power door locks, do the following: Note: You will have 30 seconds to complete the procedure. 1. Switch the ignition on. 2. Press the power door lock button three times. 3. Switch the ignition off. 4. Press the power door lock button three times. 5. Switch the ignition on. The horn will chirp indicating the programming mode has been entered. Autolock: Once in programming mode, press the power door unlock button then the lock button. The horn will chirp once if autolock was deactivated or twice (one short and one long chirp) if autolock was activated. Autounlock: Once in programming mode, press the power door lock button then the unlock button. The horn will chirp once if autounlock was deactivated or twice (one short and one long chirp) if autounlock was activated. 2014 Econoline (eco) Owners Guide gf, 1st Printing, November 2012 USA (fus)