2014 Ford Mustang Owner Manual Printing 2 - Page 61

60 MyKey Programming/Changing Optional Settings Use the information display to access your configurable MyKey settings. For Type 1 information display settings: 1. Switch the ignition on using an admin key. 2. Press SETUP until RESET FOR MYKEY SETTINGS is displayed. 3. Press and release RESET to display MyKey setup menus. 4. Press SETUP to display the next menu and scroll through your choices. 5. On any of the menus, press RESET to highlight your choice by using either of the arrow buttons: < or >. 6. Press SETUP to select your choice. The next configurable setting will be displayed. 7. Repeat Steps 5 and 6 until you are done changing your configurable settings. For Type 2 information display settings: 1. Switch the ignition on using an admin key. 2. Access the main menu and select Settings, then MyKey. 3. Use the arrow buttons < or > to get to a configurable feature. 4. Press OK or > to scroll through settings. 5. Press OK or > to make a selection. CLEARING ALL MYKEYS You can clear all MyKeys within the same key cycle as you created the MyKey. If you switch your ignition off, however, you will need to use an admin key to clear your MyKeys. Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status at once. To clear all MyKeys of all MyKey settings, use the information display to do the following: For Type 1 information display settings: 1. Access the main menu of your information display and press SETUP until PRESS RESET TO CLEAR MYKEY displays. 2. Press and release the RESET button. The display will show HOLD RESET TO CONFIRM CLEAR. 3. Press and hold the RESET button for two seconds until ALL MYKEYS CLEARED displays. 2014 05+ Mustang (197) Owners Guide gf, 2nd Printing, May 2013 USA (fus)