2015 Ford Expedition EL Owner Manual Printing 1 - Page 204

Four-Wheel Drive (If Equipped) USING FOUR-WHEEL DRIVE (4WD) (IF EQUIPPED ) 203 WARNING: For important information regarding safe operation of this type of vehicle, see General Information in the Wheels and Tires chapter. Note: Do not use 4X4 mode on dry, hard surfaced roads. Doing so will produce excessive noise, increase tire wear and may damage drive components. 4X4 mode is only intended for consistently slippery or loose surfaces. Note: If 4X4 low is selected while the vehicle is moving above 3 mph (5 km/h), the 4WD system will not perform a shift. This is normal and should be no reason for concern. Refer to Shifting to/from 4L (4X4 Low) for proper operation. 4WD Indicator Lights The indicator lights illuminate in the message center in the reconfigurable telltale (RTT) location under the following conditions. Refer to Warning Lamps and Indicators in the Instrument Cluster chapter. Note: When a 4X4 system fault is present, the system will typically remain in whichever 4X4 mode was selected prior to the fault condition occurring. It will not default to 4X2 in all circumstances. When this warning is displayed, have your vehicle serviced by an authorized dealer. 4X2 - Momentarily illuminates when 2H is selected. 4X4 AUTO - Continuously illuminates when 4A is selected 4X4 - Continuously illuminates when 4H is selected. 4X4 LOW - Continuously illuminates when 4L is selected.