2015 Ford Explorer Owner Manual Printing 2 - Page 244

Cruise Control 243 To help you to pass, the system may provide a small, temporary acceleration when you switch on the left turn signal while following a lead vehicle. If the system predicts that its maximum braking level will not be sufficient, an audible warning will sound while the system continues to brake. This is accompanied by a heads-up display; a red warning bar illuminating on the windshield. You should take immediate action. Setting the Gap Distance Note: It is your responsibility to select a gap appropriate to the driving conditions. You can decrease or increase the distance between your vehicle and the vehicle in front of you by pressing the GAP control up or down. The selected gap will display in the information display as shown by the bars in the graphic. Four gap distance settings are available. Graphic display (bars between vehicles) 1 bar 2 bars 3 bars 4 bars Following distance 1 second 1.4 seconds 1.8 seconds 2.2 seconds Following distance at 60 mph (100 km/h) 31 yards (28 m) 43 yards (39 m) 55 yards (50 m) 67 yards (61 m) Dynamic behavior Sporty Normal Normal Comfort Each time you restart your vehicle, the system will select the last chosen gap for the current driver. Disengaging Adaptive Cruise Control Press the brake pedal or press CNCL to disengage the system. Disengaging the system will not erase your previous set speed. Overriding Adaptive Cruise Control WARNING: Whenever the driver is overriding the ACC by pressing the accelerator pedal, the ACC will not automatically apply the brakes to maintain separation from any vehicle ahead. You can override the set speed and gap distance by pressing the accelerator pedal. 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)