2015 Ford F150 SuperCrew Cab Quick Reference Guide Printing 1 - Page 3

Instrument Panel 1 2 3 4 5 6 6 1 POWERSCOPE® POWER-FOLDING, POWER-ADJUSTABLE TELESCOPING MIRRORS* To telescope your mirrors, make sure you switch your vehicle on (with the ignition in accessory mode or the engine running) and then: 1. P  ress and release the or control. 2. Press the adjustment control to position the mirrors. • Press the left arrow to extend the mirrors out. Press the right arrow to retract the mirrors in. spot lamps light the area in front of and to the side of your vehicle. Adjust the aim of the spot lamps by moving the exterior mirrors' positions. LIGHTING CONTROL Headlamps off. Parking lamps on. 5 ADJUSTABLE FOOT PEDALS* Move the brake and accelerator pedals by using the control located on the left side of the steering column.  ress the left arrow to move the P pedals away from you.  ress the right arrow P pedals closer to you. to move the 4-5 ADAPTIVE CRUISE CONTROL* Automatically adjust your speed to maintain a set distance between your vehicle and the vehicle in front of you in the same lane. Set the gap distance between your vehicle and the vehicle in front of you by and pressing GAP+ or GAP- or controls on the steering wheel. Note: Driving aids do not replace the need to watch where the vehicle is moving and brake where necessary. Refer to the Cruise Control chapter in your Owner's Manual for more details. POWER TILT-TELESCOPE STEERING COLUMN* Use the control on the side of the steering column to adjust the position. To tilt: Press the top or bottom of the control. To telescope: Press the front or rear of the control. The column moves to the full up and away position when you switch the ignition off. It returns to your previous setting when you switch the ignition on. You can enable or disable this feature in the information display. *if equipped 3 Headlamps on.  Autolamps on. Automatically 7 switches the exterior lamps on or off based on available daylight. to switch the fog lamps on or off. You can switch the fog lamps on when the lighting control is in any position except off and the high beams are not on. Adjust the pedals only after stopping your vehicle and placing it in park (P). INFORMATION DISPLAY PRODUCTIVITY SCREEN* Monitor and control important vehicle information and features through the information display. to • Press the up or down arrows scroll through and highlight the options within a menu. • Press the right arrow a sub-menu. • Press the left arrow to enter into to exit a menu.  Fog lamps on. Press the control • Press the up or down arrow to fold the mirrors toward the window glass. Press the up to fold the or down arrow mirrors out. Note: Once you press the control to use the power telescoping mirrors feature, you lock out other mirror functions for a short time. Press the control again to unlock other power mirror features, or wait until the lock out times out. LED SIDE-MIRROR SPOTLIGHTS CONTROL* The spot lamps are on the forwardfacing side of the exterior mirrors. With the lighting control switch in the parking lamps, headlamps or autolamps position, press the buttons located above the lighting control switch to activate the left-hand or right-hand side spot lamps. Once switched on, the 6 4 ELECTRIC PARKING BRAKE* On certain models, the electric parking brake replaces the conventional foot brake. The operating switch is on the instrument panel, to the left of the steering column. To apply the electric parking brake, make sure the transmission is locked into park (P), and then pull the switch up. The brake system lamp then lights to confirm that the parking brake is applied. To release the electric parking brake, switch the ignition on, press the brake pedal, and then manually press the switch down. The brake system lamp then turns off to confirm the parking brake is released. • Press OK to choose and confirm a setting or message. You can even customize your views using MyView. Refer to the Information Displays chapter in your Owner's Manual for more details. 8 2 7 8