2015 Ford F150 SuperCrew Cab Quick Reference Guide Printing 1 - Page 5

2015 Ford F150 SuperCrew Cab Manual

Page 5 highlights

Instrument Panel 14 HILL DESCENT CONTROL The feature helps you set and maintain vehicle speed while descending steep grades on various surface conditions. This feature can maintain vehicle speeds on downhill grades between 2 mph (5 km/h) and 20 mph (32 km/h). At speeds between 20 mph (32 km/h) and 40 mph (64 km/h), the system remains armed, but descent speed cannot be set or maintained. At speeds above 40 mph (64 km/h), the system will turn off and you need to switch the system back on to use. To switch this feature on and set the descent speed, do the following: 1. P  ress and release the hill descent located on the button instrument panel. A light in the control turns on and a tone sounds. 2. To increase descent speed, press the accelerator pedal until you reach the desired speed. To decrease descent speed, press the brake pedal until you reach the desired speed. For more detailed information, please refer to your Owner's Manual. stability control helps avoid a vehicle rollover. The traction control system helps avoid drive wheel spin and loss of traction. You can switch the system off manually . Refer to your Stability Control chapter in your Owner's Manual for more details. TRAILER SWAY CONTROL* The feature applies your vehicle brakes at individual wheels and, if necessary, reduces engine power. If the trailer begins to sway, the stability control . The first thing to do light flashes is slow your vehicle down, then pull safely to the side of the road and check for proper tongue load and trailer load distribution. For more information, please refer to the Towing chapter in your Owner's Manual. PROGRESSIVE RANGE SELECTION With the gearshift lever in drive (D), press the (-) button on your transmission gearshift lever or column shifter to switch progressive range selection on. The available and selected gears light in the information display. All available gears show with the current gear indicated. Press the (-) button again to lock out gears beginning with the highest gear. For example, press the (-) button twice to lock out the 6th and 5th gears. Only the available gears display and the transmission automatically shifts between the available gears. Press the (+) button to unlock gears to allow the transmission to shift to higher gears. The transmission will shift automatically within the gear range you select. 8-9 To switch this feature off, press , the Auto Start-Stop button located on the center console. The button lights. Press the button again to restart. Note: The system automatically turns off when you switch on tow/ haul or 4x4 mode. See the Unique Driving Characteristics chapter in your Owner's Manual for more details. 110-VOLT, 400-WATT POWER OUTLET You can use the power outlet when your vehicle is running to power many electric devices, including but not limited to: • Electric hand drills. • Rechargeable power tools. • Video games. • Laptops. • Television screens. Other power points and outlets are in the center console. See the Auxiliary Power Points chapter in your Owner's Manual for details. 16 TOW/HAUL MODE This feature helps improve transmission operation when towing a trailer or hauling a heavy load. To switch tow/haul on, press the button (on the side of the gearshift lever on a floor-shift transmission [as shown], or on the end of the column-shift transmission lever). in the instrument cluster. 19 17 HAZARD WARNING FLASHER CONTROL AUTO START-STOP* On certain models, the system helps reduce fuel consumption by automatically shutting off and restarting the engine while at a stop. The engine will restart automatically when you release the brake pedal. 15 14 15 16 17 18 19 ADVANCETRAC® WITH ROLL STABILITY CONTROL™ (RSC®) STABILITY ENHANCEMENT SYSTEM The AdvanceTrac stability system helps you to keep control of your vehicle when on a slippery surface. The electronic stability control portion of the system helps avoid skids and lateral slides. Roll 18 The TOW HAUL indicator light appears To switch off, press the button again. Refer to the Transmission chapter in your Owner's Manual for more information. *if equipped

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

14
15
17
18
19
18
17
15
16
14
19
*if equipped
HILL DESCENT CONTROL
The Feature helps you set and maintain
vehicle speed while descending steep
grades on various surFace conditions.
This Feature can maintain vehicle speeds
on downhill grades between 2 mph
(5 km/h) and 20 mph (32 km/h). At
speeds between 20 mph (32 km/h) and
40 mph (64 km/h), the system remains
armed, but descent speed cannot be
set or maintained. At speeds above
40 mph (64 km/h), the system will turn
o± and you need to switch the system
back on to use.
To switch this Feature on and set the
descent speed, do the Following:
1.
Press and release the hill descent
button
located on the
instrument panel. A light in the
control turns on and a tone sounds.
2.
To increase descent speed, press the
accelerator pedal until you reach the
desired speed. To decrease descent
speed, press the brake pedal until
you reach the desired speed. ²or
more detailed inFormation, please
reFer to your
Owner’s Manual
.
ADVANCETRAC
®
WITH ROLL
STABILITY CONTROL
(RSC
®
) STABILITY
ENHANCEMENT SYSTEM
The AdvanceTrac stability system helps
you to keep control oF your vehicle when
on a slippery surFace. The electronic
stability control portion oF the system
helps avoid skids and lateral slides. Roll
AUTO START-STOP
*
On certain models, the system
helps reduce Fuel consumption
by automatically shutting o± and
restarting the engine while at a stop.
The engine will restart automatically
when you release the brake pedal.
8
9
To switch this Feature o±, press
the
Auto Start-Stop
button
,
located on the center console. The
button lights. Press the button again
to restart.
Note:
The system automatically
turns o² when you switch on tow/
haul or 4x4 mode.
See the
Unique Driving
Characteristics
chapter in your
Owner's Manual
For more details.
110-VOLT, 400-WATT
POWER OUTLET
You can use the power outlet when
your vehicle is running to power
many electric devices, including but
not limited to:
• Electric hand drills.
• Rechargeable power tools.
• Video games.
• Laptops.
• Television screens.
Other power points and outlets
are in the center console. See the
Auxiliary Power Points
chapter in
your
Owner's Manual
For details.
stability control helps avoid a vehicle
rollover. The traction control system
helps avoid drive wheel spin and loss
oF traction. You can switch the system
o± manually
. ReFer to your
Stability
Control
chapter in your
Owner’s
Manual
For more details.
TRAILER SWAY CONTROL
*
The Feature applies your vehicle brakes
at individual wheels and, iF necessary,
reduces engine power. IF the trailer
begins to sway, the stability control
light µashes
. The ³rst thing to do
is slow your vehicle down, then pull
saFely to the side oF the road and check
For proper tongue load and trailer load
distribution. ²or more inFormation,
please reFer to the
Towing
chapter in
your
Owner’s Manual
.
TOW/HAUL MODE
This Feature helps improve
transmission operation when towing
a trailer or hauling a heavy load.
To switch tow/haul on, press the button
(on the side oF the gearshif lever on
a µoor-shif transmission [as shown],
or on the end oF the column-shif
transmission lever).
The
TOW HAUL
indicator light appears
in the instrument cluster.
To switch o±, press the button again.
ReFer to the
Transmission
chapter
in your
Owner’s Manual
For
more inFormation.
PROGRESSIVE
RANGE SELECTION
With the gearshif lever in drive
(D), press the (
) button on your
transmission gearshif lever or column
shifer to switch progressive range
selection on. The available and
selected gears light in the inFormation
display. All available gears show with
the current gear indicated. Press the
(
) button again to lock out gears
beginning with the highest gear.
²or example, press the (
) button
twice to lock out the 6th and 5th
gears. Only the available gears display
and the transmission automatically
shifs between the available gears.
Press the (
+
) button to unlock gears
to allow the transmission to shif to
higher gears. The transmission will
shif automatically within the gear
range you select.
HAZARD WARNING
FLASHER CONTROL
16
Instrument Panel