2015 Ford Flex Quick Reference Guide Printing 1 - Page 7

2015 Ford Flex Manual

Page 7 highlights

COMFORT FLAT-FOLDING THIRD-ROW SEAT* To Fold and Stow the Third-Row Seat Note: Make sure that the area under the seat is free of objects before stowing it. 1) Remove all objects from the seat and floor stowage tub area. 2)  Fold the head restraint by pulling the head restraint release strap. FLEX COMFORT To Unstow the Third-Row Seat POWERFOLD® THIRD-ROW SEAT* Note: The powerfold seats work only when the vehicle is in park (P) and the liftgate is open. The third-row seat features a power one-touch operation that allows you to adjust the seats with the touch of a button. The buttons are behind the third-row seats on the left-side, quarter-trim panel. To use, press the RH/BOTH/LH button to select the right seat, both seats or the left seat that you want to move. Then select the desired seat position: - Press the STOW button to stow the seat into the tub floor. - Press the FOLD button (the top portion of the button) to fold down the seatback. - Press the NORMAL button to return the seat to the normal seating position. 4)  To fold the seat fully into the floor, release the seat latches by pulling and holding the short black strap and then pulling the headrest release strap. This tumbles the seat all the way into the floor tub. Note: Make sure that the area under the seat is free of objects before unstowing it. 1)  Unlatch and lift the seat out of the tub in the floor by squeezing and pulling up on the handle. When the seat is in a vertical position, push the seat over, letting it fall onto the latches. 2)  To return the seatback to the upright position, pull the red strap, then while holding the red strap, pull the long strap located on the seat back to raise the seatback. 3) Pull the head restraints up to their normal position. Note: Push and pull on the seat to make sure it latches to the vehicle floor. An unlatched seat may become dangerous in the event of a sudden stop or crash. 3)  From the rear of the vehicle, fold the seatback by pulling and holding the red strap while pushing the seatback forward. Release the strap once the seatback starts rotating forward. *IF EQUIPPED *IF EQUIPPED 12 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

13
12
FLAT-FOLDING THIRD-ROW SEAT
*
To Fold and Stow the Third-Row Seat
Note:
Make sure that the area under the seat is free of objects
before stowing it.
1) Remove all objects from the seat and floor stowage tub area.
2)
Fold the head restraint by pulling the head restraint release strap.
3)
From the rear of the vehicle, fold the seatback by pulling and holding
the red strap while pushing the seatback forward. Release the strap
once the seatback starts rotating forward.
4)
To fold the seat fully into the floor, release the seat latches by pulling
and holding the short black strap and then pulling the headrest
release strap. This tumbles the seat all the way into the floor tub.
COMFORT
FLEX
*IF EQUIPPED
COMFORT
To Unstow the Third-Row Seat
Note:
Make sure that the area under the seat is free of objects
before unstowing it.
1)
Unlatch and lift the seat out of the tub in the floor by squeezing and
pulling up on the handle. When the seat is in a vertical position, push
the seat over, letting it fall onto the latches.
2)
To return the seatback to the upright position, pull the red strap, then
while holding the red strap, pull the long strap located on the seat
back to raise the seatback.
3) Pull the head restraints up to their normal position.
Note:
Push and pull on the seat to make sure it latches to the
vehicle floor. An unlatched seat may become dangerous in
the event of a sudden stop or crash.
POWERFOLD
®
THIRD-ROW SEAT
*
Note:
The powerfold seats work only when the vehicle is in
park (P) and the liftgate is open.
The third-row seat features a power one-touch operation that allows
you to adjust the seats with the touch of a button. The buttons are
behind the third-row seats on the left-side, quarter-trim panel.
To use, press the
RH/BOTH/LH
button to select the right seat, both
seats or the left seat that you want to move.
Then select the desired seat position:
-
Press the
STOW
button to stow the seat into the tub floor.
-
Press the
FOLD
button (the top portion of the button) to fold down
the seatback.
-
Press the
NORMAL
button to return the seat to the normal
seating position.
*IF EQUIPPED