1998 GMC Safari Owner's Manual - Page 316

Care of Safety Belts and Built-in Child Restraint Harness eep the safety belts and the built-in child restraint harness clean and dry. window, since they may have be scrapedoff later. If to abrasive cleanersare used on the inside the rear of window, an electric defogger element may damaged. be Any temporary license should not be attached across the defogger grid. 1,A ~ CAUTION: Cleaning the Outside the of Windshield, Backglass and Wiper Blades If the windshield is not clear after using the windshield washer, or if the wiper blade chatters when running, wax, sap or other material may on the blade or windshield. be Clean the outsideof the windshield with GM Windshield Cleaner, Bon Ami@Powder (non-scratching glass cleaning powder), GM Part 1050011. The No. windshield is clean beads do not form when you rinse if it with water. Grime from the windshield will stick to the wiper blades and affect their performance. Clean the blade by wiping vigorously with a cloth soaked in full-strength windshield washer solvent. Then rinse the blade with water. Do not bleach or dye safety belts or the built-in do, child restraint harness. If you they may be severely weakened. In a crash, they might not be able to provide adequate protection. Clean the safety belts and the child restraint harness only with mild soap and lukewarm water. Cleaning Glass Surfaces Glass should be cleaned often. GM Glass Cleaner (GM Part No. 1050427) or a liquid household glass cleaner will remove normal tobacco smoke and dust films on interior glass. Check the wiper blades and clean them as necessary; Don't use abrasive cleaners on glass, because they may replace blades that look worn. cause scratches.Avoid placing decals on the inside rear 6-54