2004 GMC Canyon Owner's Manual
2004 GMC Canyon Manual
2004 GMC Canyon manual content summary:
- 2004 GMC Canyon | Owner's Manual - Page 1
2004 GMC Canyon Owner Manual Seats and Restraint Systems ...1-1 Front Seats ...1-3 Rear Seats ...1-9 Safety Belts ...1-11 Child Restraints ...1-31 Air Bag Systems ...1-60 Restraint System Check ...1-73 Features and Controls ...2-1 Keys ...2-2 Doors and Locks ...2-7 Windows ...2-12 Theft-Deterrent - 2004 GMC Canyon | Owner's Manual - Page 2
Box 07130 Detroit, MI 48207 GENERAL MOTORS, GM, the GM Emblem, GMC, and the GMC Emblem are registered trademarks and the name CANYON is a trademark of General Motors Corporation. This manual will help you learn about the features and controls for your vehicle. In this manual, you will find that - 2004 GMC Canyon | Owner's Manual - Page 3
Safety Warnings and Symbols You will find a number of safety cautions in this book. We use a box and the word CAUTION to tell you about things that could hurt you if you were to ignore the warning. You will also find a circle - 2004 GMC Canyon | Owner's Manual - Page 4
. Many times, this damage would not be covered by your warranty, and it could be costly. But the notice will tell you what to do to help avoid the damage. When you read other manuals, you might see CAUTION and NOTICE warnings in different colors or in different words. You'll also see - 2004 GMC Canyon | Owner's Manual - Page 5
These are some examples of symbols you may find on your vehicle: v - 2004 GMC Canyon | Owner's Manual - Page 6
✍ NOTES vi - 2004 GMC Canyon | Owner's Manual - Page 7
an Air Bag Off Switch) ...1-58 Front Seats ...1-3 Manual Seats ...1-3 Power Seats ...1-4 Manual Lumbar ...1-5 Heated Seats ...1-5 Reclining Seatbacks ...1-6 Head Restraints ...1-7 Seatback Latches ...1-8 Rear Seats ...1-9 Rear Seat Operation (Crew Cab) ...1-9 Rear Seat Operation (Extended Cab - 2004 GMC Canyon | Owner's Manual - Page 8
Systems Servicing Your Air Bag-Equipped Vehicle ...1-72 Adding Equipment to Your Air Bag-Equipped Vehicle ...1-73 Restraint System Check ...1-73 Checking Your Restraint Systems ...1-73 Replacing Restraint System Parts After a Crash ...1-74 Air Bag Systems ...1-60 Where Are the Air Bags? ...1-63 - 2004 GMC Canyon | Owner's Manual - Page 9
Front Seats Manual Seats This section tells you about the seats - how to adjust them, and fold them up and down. {CAUTION: You can lose control of the vehicle if you try to adjust a manual is not moving. Move the lever located under the front of a manual seat up to unlock it. Slide the seat to - 2004 GMC Canyon | Owner's Manual - Page 10
vehicle has this feature, there will be a control on the outboard side of the front seat(s). Horizontal Control: Raise or lower the front of the seat by Move the seat forward or rearward by moving the whole control toward the front or the rear of the vehicle. Moving the whole control up or down - 2004 GMC Canyon | Owner's Manual - Page 11
and clockwise to decrease lumbar support. This feature will quickly heat the lower cushion and lower back of the driver's and front passenger's seats for added comfort. Press the lower part of the switch to turn the heater on at low heat. Press the upper part of the switch to turn the heater on - 2004 GMC Canyon | Owner's Manual - Page 12
reclining seatbacks. To manually recline your seatback, lift the lever on the outboard side of the seat. Release the lever to lock the seatback where to recline the seatback. Move the reclining front seatback forward or rearward by moving the control toward the front or rear of the vehicle. But don - 2004 GMC Canyon | Owner's Manual - Page 13
can't do their job when you're reclined like this. The shoulder belt can't do its job because it won't be against your body. Instead, it will be in front of you. In a crash you could go into it, receiving neck or other injuries. The lap belt can't do its job either - 2004 GMC Canyon | Owner's Manual - Page 14
fold the front seatback forward, push the lever on the side of the seat rearward and pull the seatback forward. {CAUTION: If the seatback isn't locked, it there. Always press rearward on the seatback to be sure it is locked. To return the seatback to the upright position, push the seatback all - 2004 GMC Canyon | Owner's Manual - Page 15
(Crew Cab) If your vehicle is a crew cab, until you hear a click. 4. Repeat Steps 2 and 3 to fold down the other seatback. {CAUTION: If the seatback isn't locked, it could move be seriously injured. After raising the rear seatback, always check to be sure that the safety belts are properly routed - 2004 GMC Canyon | Owner's Manual - Page 16
Lift the seatback up and push it back into place. 2. Reconnect the center safety belt latch plate to the buckle. 3. Make sure the seatback is locked should be kept in the upright, locked position. Rear Seat Operation (Extended Cab) If your vehicle has an extended cab, there may be a forward folding - 2004 GMC Canyon | Owner's Manual - Page 17
Safety Belts: They Are for Everyone This part of the manual tells you how to use safety belts properly buckled up. Always fasten your safety belt, and check that your passengers' belts are fastened properly too. Your vehicle has a light that comes on as a reminder to buckle up. See Safety - 2004 GMC Canyon | Owner's Manual - Page 18
Belts Work When you ride in or on anything, you go as fast as it goes. Take the simplest vehicle. Suppose it's just a seat on wheels. 1-12 - 2004 GMC Canyon | Owner's Manual - Page 19
Put someone on it. Get it up to speed. Then stop the vehicle. The rider doesn't stop. 1-13 - 2004 GMC Canyon | Owner's Manual - Page 20
The person keeps going until stopped by something. In a real vehicle, it could be the windshield... or the instrument panel... 1-14 - 2004 GMC Canyon | Owner's Manual - Page 21
are supplemental systems only; so they work with safety belts - not instead of them. Every air bag system ever offered for sale has required the use of safety belts. Even if you're in a vehicle that has air bags, you still have to buckle up to get the most protection. That's true not only in - 2004 GMC Canyon | Owner's Manual - Page 22
safety belts? How to Wear Safety Belts Properly This part is only for people of adult size. Be aware that there are special things to know part describes the driver's restraint system. Lap-Shoulder Belt The driver has a lap-shoulder belt. Here is how to wear it properly. 1. Close and lock the door - 2004 GMC Canyon | Owner's Manual - Page 23
clicks. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see Safety Belt Extender on lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly. 5. To make the lap part - 2004 GMC Canyon | Owner's Manual - Page 24
the release buttons to make sure it has locked into position. The lap part of the belt should be worn low and snug on the hips, just touching the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The safety belt locks if there is a sudden stop - 2004 GMC Canyon | Owner's Manual - Page 25
if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body. A: The shoulder belt is too loose. It will not give nearly as much protection this way. 1-19 - 2004 GMC Canyon | Owner's Manual - Page 26
Q: What's wrong with this? {CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious internal injuries. Always buckle your belt - 2004 GMC Canyon | Owner's Manual - Page 27
Q: What's wrong with this? {CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the - 2004 GMC Canyon | Owner's Manual - Page 28
forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it. A: The belt is twisted across the body. 1-22 - 2004 GMC Canyon | Owner's Manual - Page 29
sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle. A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy. The best way to - 2004 GMC Canyon | Owner's Manual - Page 30
the belt out all the way, you will engage the child restraint locking feature. If this happens, just let the belt go back all the way and start again. Center Front Passenger Position Lap Belt If your vehicle has a 60/40 split front seat, someone can sit in the center position. When you sit - 2004 GMC Canyon | Owner's Manual - Page 31
as shown until the belt is snug. Buckle, position and release it the same way as the lap part of a lap-shoulder belt. If the belt is not long enough, see Safety Belt Extender on page 1-30. Make sure the release button on the buckle is positioned so you would be able - 2004 GMC Canyon | Owner's Manual - Page 32
pull the belt across you. Do not let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the across you more slowly. 2. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. When the - 2004 GMC Canyon | Owner's Manual - Page 33
the belt as you pull up on the shoulder part. The lap part of the belt should be worn low and snug on the hips, just touching the thighs These parts of the body are best able to take belt restraining forces. The safety belt locks if there is a sudden stop or a crash. The safety belt also locks if - 2004 GMC Canyon | Owner's Manual - Page 34
adults. When attached to a shoulder belt, the comfort guide better positions the belt away from the neck and head. Here is how to attach the comfort guide to the shoulder belt. 1. Slide the guide off of its storage clip located between the interior body and the seatback. To unlatch the belt, just - 2004 GMC Canyon | Owner's Manual - Page 35
and past the belt. The elastic cord must be under the belt. Then, place the guide over the belt and insert the two edges of the belt into the slots of the guide. 3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the - 2004 GMC Canyon | Owner's Manual - Page 36
are located on the retractor part of the safety belts for the driver and right front passenger. They help the guides. Slide the guide back on its storage clip located between the interior body and the seatback. But if a safety belt isn't long enough to fasten, your dealer will order you an extender - 2004 GMC Canyon | Owner's Manual - Page 37
Child Restraints Older Children Q: What is the proper way to wear safety belts? A: If possible, an older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the - 2004 GMC Canyon | Owner's Manual - Page 38
Comfort Guides for Children and Small Adults on page 1-28. If the child is sitting in the center rear seat of a crew cab, move the child toward the safety belt buckle. In either case be sure that the shoulder belt still is on the child's shoulder, so that in a crash the child's upper body - 2004 GMC Canyon | Owner's Manual - Page 39
is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in . Wherever the child sits, the lap portion of the belt should be worn low and snug on the hips, just touching the child's thighs. This applies belt force to the - 2004 GMC Canyon | Owner's Manual - Page 40
Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in - 2004 GMC Canyon | Owner's Manual - Page 41
offer outstanding protection for adults and older children, but not for young children and infants. Neither the vehicle's safety belt system nor its air bag system is designed for them. Young children and infants need the protection that a child restraint system can provide. hold it. For example - 2004 GMC Canyon | Owner's Manual - Page 42
including support for the head and neck. This is necessary because a newborn infant's neck is weak and its head weighs so much compared with the rest of its body. In a crash, an infant in a rear-facing seat settles into the restraint, so the crash forces can be distributed across the strongest part - 2004 GMC Canyon | Owner's Manual - Page 43
are still so small that the vehicle's regular safety belt may not remain low on the hip bones, as it should. Instead, it may settle up around the child's abdomen. In a crash, the belt would apply force on a body area that's unprotected by any bony structure. This alone could cause serious or - 2004 GMC Canyon | Owner's Manual - Page 44
the infant in place and, in a crash, acts to keep the infant positioned in the restraint. A forward-facing child seat (C-E) provides restraint for the child's body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields. 1-38 - 2004 GMC Canyon | Owner's Manual - Page 45
or position children. A built-in child restraint system is a permanent part of the motor vehicle. An add-on child restraint system is a shield has shoulder straps that are attached to a flat pad which rests low against the child's body. A shelf- or armrest-type shield has straps that are attached to - 2004 GMC Canyon | Owner's Manual - Page 46
booklet, or both, and to this manual. The child restraint instructions are important, so if they are not front passenger seat unless your vehicle has an air bag off switch and the air bag off light shows off. Never put a rear-facing child restraint in the right front passenger seat unless the air bag - 2004 GMC Canyon | Owner's Manual - Page 47
be off. See Securing a Child Restraint in the Right Front Seat Position (Models with an Air Bag Off Switch) and Securing a Child Restraint Designed for the LATCH System (Models with an Air Bag Off Switch) in the Index, and Air Bag Off Switch on page 1-70 for more on this including important safety - 2004 GMC Canyon | Owner's Manual - Page 48
use with or without the top strap being anchored. Others require the top strap always to be anchored. Be sure to read and follow the instructions for your child restraint. If yours requires that the top strap be anchored, don't use the restraint unless it is anchored properly. If the child - 2004 GMC Canyon | Owner's Manual - Page 49
strap over it. When using a top strap-equipped child restraint in a rear outboard seating position of a crew cab model, route the top strap over the top of the seatback. Then, attach it to the anchor point Tighten the top strap when and as the child restraint manufacturer's instructions say. 1-43 - 2004 GMC Canyon | Owner's Manual - Page 50
. See Lower Anchorages and Top Tethers for Children (LATCH System) on page 1-46. Anchor points for the top strap in a regular or extended cab vehicle are located behind the front seat on the back wall of the passenger compartment. You must route the top strap through the loop (A) at the top of the - 2004 GMC Canyon | Owner's Manual - Page 51
rear seatback from its latches (B). See Rear Seat Operation (Crew Cab) on page 1-9 or Rear Seat Operation (Extended Cab) on page 1-10 for instructions. 2. Attach the top strap to the anchor (A). 3. Push rearward on the seatback until it locks into its upright position. Push and pull on the seatback - 2004 GMC Canyon | Owner's Manual - Page 52
the LATCH System. If it is you will find anchors (A) in the second row outboard seating positions (crew cab and extended cab) and in the front passenger position (regular cab and extended cab without rear seats). This system, designed to make installation of child restraints easier, does not use the - 2004 GMC Canyon | Owner's Manual - Page 53
installed using the anchorage points, or use the vehicle's safety belts to secure the restraint, following the instructions that came with that restraint, and also the instructions in this manual. In order to use the LATCH system in your vehicle, you need a child restraint designed for that - 2004 GMC Canyon | Owner's Manual - Page 54
Air Bag Off Switch) Regular Cab Models and Extended Cab Models without Rear Seats Your vehicle has air bags. Regular cab models and extended cab models without rear seats have an air bag off switch on the instrument panel you can use to turn off the right front passenger's frontal air bag. See Air - 2004 GMC Canyon | Owner's Manual - Page 55
your vehicle serviced. See Air Bag Off Switch on page 1-70. 1. Your vehicle has a right front passenger's frontal air bag. See Air Bag Off Switch on page 1-70. If your child restraint is forward-facing, always move the seat as far back as it will go before securing it in this seat. See Manual Seats - 2004 GMC Canyon | Owner's Manual - Page 56
the top tether anchorage if your vehicle has one. The child restraint instructions will show you how. Also see Top Strap on page 1-42. 6. a member of a passenger air bag risk group. See Air Bag Off Switch on page 1-70. {CAUTION: If the right front passenger's frontal air bag is turned off for a - 2004 GMC Canyon | Owner's Manual - Page 57
for the LATCH System (Models without an Air Bag Off Switch) Crew Cab Models and Extended Cab Models with Rear Seats 1. Find the LATCH facing, attach and tighten the top tether to the top tether anchorage. The child restraint instructions will show you how. Also see Top Strap on page 1-42. 5. Push and - 2004 GMC Canyon | Owner's Manual - Page 58
3. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 4. Pull the rest of the shoulder belt all the way out of the retractor to set the lock (crew cab only). 1-52 - 2004 GMC Canyon | Owner's Manual - Page 59
. The safety belt will move freely again and be ready to work for an adult or larger child passenger. Securing a Child Restraint in the Center Front Seat Position 5. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of - 2004 GMC Canyon | Owner's Manual - Page 60
Restraint in the Right Front Seat Position (Models with an Air Bag Off Switch) Regular Cab Models and Extended Cab Models without Rear Seats Your vehicle has a right front passenger's frontal air bag. Regular cab models and extended cab models without rear seats have a switch on the instrument panel - 2004 GMC Canyon | Owner's Manual - Page 61
restraint when and as the instructions say. 1. Your vehicle has a right front passenger's frontal air bag. See Air Bag Off Switch on page 1-70. If your child restraint is forward-facing, always move the seat as far back as it will go before securing it in this seat. See Manual Seats on page 1-3 or - 2004 GMC Canyon | Owner's Manual - Page 62
4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 1-56 - 2004 GMC Canyon | Owner's Manual - Page 63
child restraint from the vehicle unless the person who will be sitting there is a member of a passenger air bag risk group. See Air Bag Off Switch on page 1-70. {CAUTION: If the right front passenger's frontal air bag is turned off for a person who is not in a risk group identified by the national - 2004 GMC Canyon | Owner's Manual - Page 64
Right Front Seat Position (Models without an Air Bag Off Switch) Crew Cab Models and Extended Cab Models instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. 1. Because your vehicle has a right front passenger's frontal air bag - 2004 GMC Canyon | Owner's Manual - Page 65
4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 1-59 - 2004 GMC Canyon | Owner's Manual - Page 66
an adult or larger child passenger. Air Bag Systems This part explains the air bag systems. Your vehicle has air bags - one air bag for the driver and another air bag for the right front passenger. Your vehicle may also have roof-mounted side impact air bags; one for the driver and the passenger - 2004 GMC Canyon | Owner's Manual - Page 67
do not replace them. CAUTION: (Continued) Frontal air bags for the driver and right front passenger are designed to work only in moderate to severe crashes where the front of your vehicle hits something. They are not designed to inflate in rollover, rear or low-speed frontal crashes, or in many side - 2004 GMC Canyon | Owner's Manual - Page 68
the vehicle's safety belt system nor its air bag system is designed for them. Young children and infants need the protection that a child restraint system can provide. Always secure children properly in your vehicle. To read how, see the part of this manual called "Older Children" or "Infants and - 2004 GMC Canyon | Owner's Manual - Page 69
the air bag symbol. Where Are the Air Bags? The system checks the air bag electrical system for malfunctions. The light tells you if there is an electrical problem. See Air Bag Readiness Light on page 3-25 for more information. The driver's air bag is in the middle of the steering wheel. 1-63 - 2004 GMC Canyon | Owner's Manual - Page 70
The right front passenger's air bag is in the instrument panel on the passenger's side. If your vehicle has a roof-mounted side impact air bag for the driver and the person seated directly behind the driver, it is located in the ceiling above the side windows. 1-64 - 2004 GMC Canyon | Owner's Manual - Page 71
do not attach or put anything on the steering wheel hub or on or near any other air bag covering. If your vehicle has side impact air bags, never secure anything to the roof of your vehicle by routing the rope or tiedown through any door or window opening. If you do, the path of an inflating - 2004 GMC Canyon | Owner's Manual - Page 72
If your vehicle strikes something that will move or deform, such as a parked car, the threshold level will be higher. The driver's and right front passenger's frontal air bags are not designed to inflate in rollovers, rear impacts, or in many side impacts because inflation would not help the occupant - 2004 GMC Canyon | Owner's Manual - Page 73
a release of gas from the inflator, which inflates the air bag. The inflator, air bag, and related hardware are all part of the air bag modules inside the steering wheel and in the instrument panel in front of the right front passenger. For vehicles with side impact air bags, the air bag modules are - 2004 GMC Canyon | Owner's Manual - Page 74
. If you experience breathing problems following an air bag deployment, you should seek medical attention. Your vehicle has a feature that will automatically unlock the doors, turn the interior lamps on and flash the hazard warning flashers when the air bag inflates (if battery power is available). You - 2004 GMC Canyon | Owner's Manual - Page 75
The service manual for your vehicle covers the need to replace other parts. commands air bag inflation. It records the status of the driver's safety belt usage in a crash in which the air bag deploys or a crash in which the air bag nearly deploys. The module also records speed, engine rpm, brake and - 2004 GMC Canyon | Owner's Manual - Page 76
ages 1 to 12 ride in the rear If your vehicle is a regular cab model or an extended cab model without rear seats, it has a switch on the instrument panel that you can use to turn off the right front passenger's frontal air bag. This switch should only be turned to the off position if the person in - 2004 GMC Canyon | Owner's Manual - Page 77
special risk for the passenger; and To turn off the right front passenger's frontal air bag, insert your ignition key into the switch, push in, and move the switch to the off position. • makes the potential harm from the passenger air bag in a crash greater than the potential harm from turning off - 2004 GMC Canyon | Owner's Manual - Page 78
. To turn the right front passenger's frontal air bag on again, insert your ignition key into the switch, push in, and move the switch to the auto position. Servicing Your Air Bag-Equipped Vehicle Air bags affect how your vehicle should be serviced. There are parts of the air bag systems in several - 2004 GMC Canyon | Owner's Manual - Page 79
bag covers, and have them repaired or replaced. (The air bag system does not need regular maintenance.) Q: Is there anything I might add to the front of the vehicle that could keep the air bags from working properly? A: Yes. If you add things that change your vehicle's frame, bumper system, front - 2004 GMC Canyon | Owner's Manual - Page 80
the time of the collision. If an air bag inflates, you will need to replace air bag system parts. See the part on the air bag system earlier in this section. If the frontal air bags inflate, you will also need to replace the driver's and right front passenger's safety belt retractor assembly. Be sure - 2004 GMC Canyon | Owner's Manual - Page 81
Area ...2-43 Bed Rails ...2-43 2-1 Keys ...2-2 Remote Keyless Entry System ...2-4 Remote Keyless Entry System Operation ...2-5 Doors and Locks ...2-7 Door Locks ...2-7 Power Door Locks ...2-8 Programmable Automatic Door Locks ...2-8 Rear Door Security Locks (Crew Cab) ...2-9 Lockout Protection - 2004 GMC Canyon | Owner's Manual - Page 82
{CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons. They could operate the power windows or other controls or even make the vehicle move. The children or others could be badly injured or even killed. Do not leave the keys in a vehicle with children. 2-2 - 2004 GMC Canyon | Owner's Manual - Page 83
There is one double-sided key for the ignition, driver's door lock, and tailgate. The key code number tells your dealer or a qualified locksmith how to make extra keys. Keep this number in a safe place. If you lose your keys, you will be able to have new ones made easily using this number. Your - 2004 GMC Canyon | Owner's Manual - Page 84
Canada. This device complies with Part 15 of the FCC Rules. Operation Check to determine if battery replacement is necessary. See "Battery Replacement" under Remote Keyless Entry System Operation on page 2-5. • If you are still having trouble, see your dealer or a qualified technician for service - 2004 GMC Canyon | Owner's Manual - Page 85
with your vehicle. UNLOCK: Press this button to unlock the driver's door and turn on the interior lights. The parking lamps may also flash, and the horn may chirp, when this button is pressed. LOCK: Press this button to lock all the doors. The parking lamps may also flash and the horn may chirp when - 2004 GMC Canyon | Owner's Manual - Page 86
also be matched. Once your dealer has coded the new transmitter, the lost transmitter will not covers of the transmitter housing. Gently pry the transmitter apart. 2. Remove and replace the battery with a three-volt CR2032 or equivalent battery. 3. Align the covers and snap them together. 4. Check - 2004 GMC Canyon | Owner's Manual - Page 87
when you slow down or stop your vehicle. Locking your doors can help prevent this from happening. To lock a door from the inside, rotate the manual lever on your door forward. To unlock a door from the inside, rotate the lever on the door rearward. You will see a colored area on the lever when the - 2004 GMC Canyon | Owner's Manual - Page 88
lever is moved back into PARK (P). Remove the ignition key and press L (lock) to lock all the doors at once. To unlock all the doors, press U (Unlock). On crew cab models, use the manual door lock lever on each rear door to lock or unlock the doors from the rear seating area. If your vehicle has - 2004 GMC Canyon | Owner's Manual - Page 89
you have power door locks, this feature protects you from locking your key in the vehicle when the key is in the ignition and a door is open. If the power door lock switch is pressed when a door is open and the key is in the ignition, all of the doors will lock and then the driver's door will unlock - 2004 GMC Canyon | Owner's Manual - Page 90
vehicle, take your keys, open your door and set the locks from inside. Then get out and close the door. Tailgate Rear Doors (Extended Cab) If you have an extended cab, your vehicle has rear doors for convenience in loading and unloading cargo. To open a rear door, open the front door. Then, use - 2004 GMC Canyon | Owner's Manual - Page 91
do the following: 1. Raise the tailgate slightly. Tailgate Partially Down Tailgate Fully Down 2. Remove the retaining cables from both ends of the tailgate by pulling upward on the clip. Then, push forward so the larger part of the hole on the bracket is over the bolt. Pull the end over the bolt - 2004 GMC Canyon | Owner's Manual - Page 92
even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather. Manual Windows On a vehicle with manual windows, use the handle on each door to open and close each window. 2-12 - 2004 GMC Canyon | Owner's Manual - Page 93
up on the switch. To open the window partway, lightly tap the switch until the window is at the desired position. Crew cab switches shown The driver's door has switches for the passenger windows as well. Your power windows will work when the ignition has been turned to ACC (Accessory) or ON or - 2004 GMC Canyon | Owner's Manual - Page 94
alarm system. If your vehicle has this feature, squeeze the latch in the center of the window and slide the glass to open it. When you close the window, be sure the latch is engaged. To activate the content theft-deterrent system, do the following: 1. Close all the doors. 2. Lock the door - 2004 GMC Canyon | Owner's Manual - Page 95
the alarm will go off. The front turn signal lamps will flash for two minutes, and the horn will sound for two minutes, then will turn off to save the battery power. Remember, the theft-deterrent system won't activate if you lock the doors with a key, the manual door lock, or power door lock switch - 2004 GMC Canyon | Owner's Manual - Page 96
used or the ignition lock cylinder is tampered with, the fuel system is disabled and the vehicle will not start. During normal operation, the security light will turn off approximately five seconds after the key is turned to RUN. See Security Light on page 3-35. If the engine stalls and the security - 2004 GMC Canyon | Owner's Manual - Page 97
you can operate your electrical accessories or items plugged into the accessory power outlets. It also unlocks the steering wheel and ignition. Use this position if your vehicle must be pushed or towed. {CAUTION: On manual transmission vehicles, turning the key to LOCK will lock the steering column - 2004 GMC Canyon | Owner's Manual - Page 98
running, you can use ON to operate your electrical accessories and to display some instrument panel cluster warning and indicator lights. START (D): This is the position that starts the engine. When the engine starts, release the key. The ignition switch will return to ON for normal driving. When - 2004 GMC Canyon | Owner's Manual - Page 99
seconds. This clears the extra gasoline from the engine. Notice: Your engine is designed to work with the electronics in your vehicle. If you add electrical parts or accessories, you could change the way the engine operates. Before adding electrical equipment, check with your dealer. If you do not - 2004 GMC Canyon | Owner's Manual - Page 100
fuel economy during engine warm-up. Usually, the coolant heater should be plugged in a minimum of four hours prior to starting your vehicle. At temperatures above 32°F (0°C), use of the coolant heater is not required. {CAUTION: Plugging the cord into an ungrounded outlet could cause an electrical - 2004 GMC Canyon | Owner's Manual - Page 101
need to leave your key in the ignition in OFF for an extended period, it is recommended that you disconnect the battery cable from the battery to prevent discharging your battery. There are several different positions for your shift lever. PARK (P): This position locks your rear wheels. It is the - 2004 GMC Canyon | Owner's Manual - Page 102
way into PARK (P) as you maintain brake application. Then move the shift lever into covered by your warranty. Be sure the engine is not running at high speed when shifting your vehicle. {CAUTION: If you have four-wheel wheel high (2H) or four-wheel high (4H) or four-wheel low (4L) - not in NEUTRAL - 2004 GMC Canyon | Owner's Manual - Page 103
driving. SECOND (2): This position gives you more power but lower fuel economy than THIRD (3). You can use SECOND (2) on hills. It can help control your speed as you go down steep mountain roads, but then you would also want to use your brakes off and on. You can also use SECOND (2) for starting - 2004 GMC Canyon | Owner's Manual - Page 104
brake pedal. Just before the vehicle stops, press the clutch pedal and the brake pedal, and shift to NEUTRAL. NEUTRAL: Use this position when you start or idle your engine has a lock out feature which prevents a fifth gear to reverse gear shift. Here is how to operate your manual transmission: FIRST - 2004 GMC Canyon | Owner's Manual - Page 105
four-wheel drive and is equipped with a manual transmission, disregard the shift light when the transfer case is in 4LO. For more information, see Up-Shift Light (Manual Transmission) on page 3-28. Up-Shift Light This light will show you when to shift to the next higher gear for best fuel economy - 2004 GMC Canyon | Owner's Manual - Page 106
drive, you can send your engine's driving power to all four wheels for extra traction. To get the most satisfaction out of four-wheel drive, you must be familiar with its operation. Read the part that follows before using four-wheel drive. You should use two-wheel-drive high (2HI) for most normal - 2004 GMC Canyon | Owner's Manual - Page 107
wheels. You might choose 4LO if you were driving off-road in sand, mud or deep snow and climbing or descending steep hills. Indicator lights in the buttons show you which setting you are in. The indicator lights will come on briefly when you turn on the ignition with a manual transmission. The - 2004 GMC Canyon | Owner's Manual - Page 108
should take your vehicle in for service to restore normal operation. Shifting to NEUTRAL Use NEUTRAL when you plan to tow your vehicle. See Recreational Vehicle Towing on page 4-47 for towing instructions. To shift the transfer case into NEUTRAL, set the parking brake, then press and hold the 2HI - 2004 GMC Canyon | Owner's Manual - Page 109
the parking brake symbol, to release the parking brake. If the ignition is on when the parking brake is released, the brake system warning light will go off. Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. Verify that - 2004 GMC Canyon | Owner's Manual - Page 110
be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure your vehicle will not - 2004 GMC Canyon | Owner's Manual - Page 111
regular brake pedal down. Then, see if you can move the shift lever away from PARK (P) without first pulling it toward you. If you can, it means that the shift lever wasn't fully locked into PARK (P). • Move the lever up as far as it will go. 3. Turn the ignition key to LOCK. 4. Remove the key and - 2004 GMC Canyon | Owner's Manual - Page 112
pedal down but still cannot shift out of PARK (P), try this: 1. Turn the key to ACC (Accessory). (There is no shift interlock in this key position.) 2. Apply and hold the brake until the end of Step 4. 3. Shift the transmission to NEUTRAL (N). 4. Start the vehicle and then shift to the gear you - 2004 GMC Canyon | Owner's Manual - Page 113
you can turn the ignition key to LOCK, remove the key and release the clutch. If you are parking on a hill, or if your vehicle is pulling a trailer, see Towing a Trailer on page 4-60. Parking Over Things That Burn {CAUTION: Things that can burn could touch hot exhaust parts under your vehicle and - 2004 GMC Canyon | Owner's Manual - Page 114
the climate control system off could allow dangerous exhaust into your vehicle. See the earlier Caution under Engine Exhaust on page 2-34. Also, idling in a closed-in place can let deadly carbon monoxide (CO) into your vehicle even if the climate control fan is at the highest setting. One place this - 2004 GMC Canyon | Owner's Manual - Page 115
have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure your vehicle will not move, even when you are on fairly level ground, always set your parking brake and move the shift lever to PARK (P). {CAUTION: If you have four-wheel drive, your vehicle - 2004 GMC Canyon | Owner's Manual - Page 116
page 2-41 for more information about the services OnStar® provides. Manual Rearview Mirror with OnStar® Your vehicle may have a manual rearview mirror with the OnStar® System and map lamps. Map Lamps The mirror has map lamps located at the bottom of the mirror. To manually turn the lamps on or off - 2004 GMC Canyon | Owner's Manual - Page 117
/off button until a C appears on the compass display. P (On/Off): T (Indicator Light): Map Lamps This light will turn on when the automatic dimming feature is active. The mirror has map lamps located at the bottom of the mirror. To manually turn the lamps on or off, press the button next to each - 2004 GMC Canyon | Owner's Manual - Page 118
number appears on the display, press the on/off button quickly until you reach the correct zone number. Stop pressing the button and the mirror will return to normal operation. If C appears in the compass window, the compass may need calibration. See "Compass Calibration" listed previously. 2-38 - 2004 GMC Canyon | Owner's Manual - Page 119
four seconds and release. This will change the temperature reading between degrees Fahrenheit, degrees Celsius, or turn the display off. Outside Manual Mirrors Adjust these mirrors by hand so that you can just see the side of your vehicle when you are sitting in a comfortable driving position. The - 2004 GMC Canyon | Owner's Manual - Page 120
If your vehicle has this feature, the controls are located on the driver's door armrest. The mirrors can be manually folded inward to prevent damage when going through an automatic car wash. To fold, push the mirror toward the vehicle. To return the mirror to its original position, push outward - 2004 GMC Canyon | Owner's Manual - Page 121
Notification of Air Bag Deployment • Emergency Services • Roadside Assistance • Stolen Vehicle Assistance • AccidentAssist • Remote Door Unlock • Remote Diagnostics • Online Concierge Directions and Connections Plan • All Safe and Sound Plan services • Route Support • RideAssist • Information and - 2004 GMC Canyon | Owner's Manual - Page 122
vehicle's speakers. Rear Cupholders If your vehicle is an extended cab or crew cab model, your vehicle also has two rear cupholders. On crew cab models, the cupholders are located at the front end of the rear center seat cushion. On extended cab models, the rear seat cupholders are located on top - 2004 GMC Canyon | Owner's Manual - Page 123
has assist handles, they may be located above the front passenger door if you have a regular cab, or above the front and rear passenger doors if you have an extended cab or crew cab. If your vehicle is equipped with roof-mounted side impact air bags, there will be assist handles located above both - 2004 GMC Canyon | Owner's Manual - Page 124
✍ NOTES 2-44 - 2004 GMC Canyon | Owner's Manual - Page 125
...3-24 Trip Odometer ...3-24 Tachometer ...3-24 Safety Belt Reminder Light ...3-24 Air Bag Readiness Light ...3-25 Air Bag Off Light ...3-26 Battery Warning Light ...3-27 Up-Shift Light (Manual Transmission) ...3-28 Brake System Warning Light ...3-28 Anti-Lock Brake System Warning Light ...3-29 - 2004 GMC Canyon | Owner's Manual - Page 126
Instrument Panel Overview Manual transmission shown, automatic transmission similar 3-2 - 2004 GMC Canyon | Owner's Manual - Page 127
Control System. See Climate Control System on page 3-18. L. Accessory Power Outlet. See Accessory Power Outlets on page 3-16. M. Air Bag Off Switch (Regular cab and rear seat delete only). See "Air Bag Off Switch" under Air Bag Systems on page 1-60. N. Glove Box. See Glove Box on page 2-42. 3-3 - 2004 GMC Canyon | Owner's Manual - Page 128
air vents in the center. Your hazard warning flashers work no matter what position your key is in, and even if the key isn't in. Press the button to make the front let you warn others. They also let police know you have a problem. Your front and rear turn signal lamps will flash on and off. Other - 2004 GMC Canyon | Owner's Manual - Page 129
and pull the tilt lever toward you. Move the wheel to a comfortable level, then release the tilt lever to lock the wheel in place. Do not adjust the steering wheel while driving. Turn and Lane Change Signals Headlamp High/Low-Beam Changer Flash-to-Pass Windshield Wipers Windshield Washer Cruise - 2004 GMC Canyon | Owner's Manual - Page 130
burned out, replace it to help avoid an accident. If the arrows don't go on at all when you signal a turn, check for burned-out bulbs and a blown fuse. See Fuses and Circuit Breakers on page 5-104. Turn Signal On Chime If your turn signal is left on for more than 3/4 of a mile (1.2 km - 2004 GMC Canyon | Owner's Manual - Page 131
lever toward the instrument panel. To return to low-beam headlamps, pull the multifunction lever toward you. Then release it. When the high beams are on, this indicator light on the instrument panel cluster will also be on. Flash-to-Pass This feature lets you use your high-beam headlamps to signal - 2004 GMC Canyon | Owner's Manual - Page 132
for a long or short delay between wipes. This can be very useful in light rain or snow. Turn the band to choose the delay time. The closer windshield, blocking your vision. N(Delay): QL(Washer Fluid): 6 (Low Speed): For steady wiping at low speed, turn the band away from you to the first solid - 2004 GMC Canyon | Owner's Manual - Page 133
the master cylinder brake fluid level is low. If you apply your brakes, the cruise control will shut off. 9(Off): This position turns the system off. {CAUTION: Cruise control can be dangerous where you can not drive safely at a steady speed. So, do not use your cruise control on winding roads or in - 2004 GMC Canyon | Owner's Manual - Page 134
up to your chosen speed and stay there. If you hold the switch at resume/accelerate the vehicle will keep going faster until you release the switch or apply the brake. So unless you want to go faster, don't hold the switch at resume/accelerate. {CAUTION: If you leave your cruise control on when - 2004 GMC Canyon | Owner's Manual - Page 135
. Each time you do this, you'll go about 1 mph (1.6 km/h) slower. • Step lightly on the brake pedal • Move the cruise control switch to off Erasing Speed Memory When you turn off the cruise control or the ignition, your cruise control set speed memory is erased. Passing Another Vehicle While Using - 2004 GMC Canyon | Owner's Manual - Page 136
with the following: Sidemarker Lamps Taillamps License Plate Lamps Instrument Panel Lights The control on the driver's side of your instrument panel operates the together with the previously listed lamps and lights. You can switch your headlamps from low to high beam by pushing the turn signal/multifunction - 2004 GMC Canyon | Owner's Manual - Page 137
See "Instrument Panel Brightness" under Interior Lamps on page 3-15. Lamps On Reminder If a door is open, a reminder chime will sound when your headlamps or parking lamps are manually turned on and your key is out of the ignition. To turn off the chime, turn the headlamp switch to off and then back - 2004 GMC Canyon | Owner's Manual - Page 138
/or low-beam headlamps must be on for your fog lamps to work. The fog lamp button is located near the exterior lamps control. The ignition is light will glow in the button when the fog lamps are on. Remember, fog lamps alone will not give off as much light as your headlamps. Never use your fog - 2004 GMC Canyon | Owner's Manual - Page 139
lamps. Press this button to turn the cargo lamps on and off. Interior Lamps Instrument Panel Brightness The thumbwheel for this feature is located next to the exterior lamps control. See Exterior Lamps on page 3-12. D (Instrument Panel Lights): Turn the thumbwheel up or down to brighten or dim the - 2004 GMC Canyon | Owner's Manual - Page 140
of the center console. A small cap must be pulled down to access an accessory power outlet. When not using an outlet be sure to cover it with the protective cap. Notice: Leaving electrical equipment on for extended periods will drain the battery. Always turn off electrical equipment when not in use - 2004 GMC Canyon | Owner's Manual - Page 141
. Check with your dealer before adding electrical equipment. When adding electrical equipment, be sure to follow the proper installation instructions included with the equipment. Notice: Improper use of the power outlet can cause damage not covered by your warranty. Do not hang any type of accessory - 2004 GMC Canyon | Owner's Manual - Page 142
Climate Control System Temperature Knob The left knob on the control panel is used to adjust the temperature of the air in the vehicle. Turn the knob clockwise or counterclockwise to increase or decrease the temperature. Fan Knob 9 (Fan): The center knob on the control panel is used to control the - 2004 GMC Canyon | Owner's Manual - Page 143
vehicle. It can be used to prevent outside odors from entering your vehicle and cool the air inside your vehicle more quickly. Press this button to turn the recirculation mode on or off. An indicator light on the button will come on to let you know the recirculation mode is activated. Recirculation - 2004 GMC Canyon | Owner's Manual - Page 144
fuel economy while still maintaining the selected temperature. The air conditioning system removes moisture from the air, so you may sometimes notice a small amount of water dripping underneath your vehicle while idling or after turning off the engine. This is normal. Defogging and Defrosting Fog - 2004 GMC Canyon | Owner's Manual - Page 145
non-GM approved hood deflectors may adversely affect the performance of the system. • Keep the path under the front seats clear of objects to help circulate the air inside of your vehicle more effectively. Lift up or push down on the thumbwheel located in the center of the outlet to direct the - 2004 GMC Canyon | Owner's Manual - Page 146
, or when one of the gages shows there may be a problem, check the section that tells you what to do about it. Please follow this manual's advice. Waiting to do repairs can be costly - and even dangerous. So please get to know your warning lights and gages. They are a big help. Your vehicle may - 2004 GMC Canyon | Owner's Manual - Page 147
cluster is designed to let you know at a glance how your vehicle is running. You will know how fast you are going, about how much fuel you have used, and many other things you will need to know to drive safely and economically. United States automatic transmission version shown, Canada similar - 2004 GMC Canyon | Owner's Manual - Page 148
United States) or kilometers (used in Canada). The odometer mileage can be checked without the vehicle running. Simply press the trip information be covered by your warranty. Do not operate the engine with the tachometer in the shaded warning area. Safety Belt Reminder Light When the key is turned - 2004 GMC Canyon | Owner's Manual - Page 149
Air Bag Readiness Light There is an air bag readiness light on the instrument panel, which shows the air bag symbol. The system checks the air bag's electrical system for malfunctions. The light tells you if there is an electrical problem. The system check includes the air bag sensors, the air bag - 2004 GMC Canyon | Owner's Manual - Page 150
Air Bag Off Light Regular Cab Models and Extended Cab Models without Rear Seats When you turn the air bag off switch to the off position, the off indictor will come on and stay on to remind you that the air bag has been turned off. When you turn the air bag off switch to the auto position, the on - 2004 GMC Canyon | Owner's Manual - Page 151
, you may have a problem with the electrical charging system. Have it checked right away. Driving while this light is on could drain your battery and result in a vehicle that may stall. If you must drive a short distance with the light on, be certain to turn off all your accessories, such as the - 2004 GMC Canyon | Owner's Manual - Page 152
, though, you need both parts working well. If the warning light comes on, there could be a brake problem. Have your brake system inspected right away. Shifting when the indicator light is on will help you get the best fuel economy. See "Up-Shift Light" under Manual Transmission Operation on page - 2004 GMC Canyon | Owner's Manual - Page 153
have anti-lock brakes. If the regular brake system warning light is also on, you don't have anti-lock brakes and there's a problem with your regular brakes. See Brake System Warning Light on page 3-28. The anti-lock brake system warning light should come on briefly when you turn the ignition key to - 2004 GMC Canyon | Owner's Manual - Page 154
for the life of the vehicle, helping to produce a cleaner environment. The check engine light comes on to indicate that there is a problem and service is required. Malfunctions often will be indicated by the system before any problem is apparent. This may prevent more serious damage to your vehicle - 2004 GMC Canyon | Owner's Manual - Page 155
this light on, after a while, your emission controls may not work as well, your fuel economy may not be as good and your engine may not run as smoothly. This could lead to costly repairs that may not be covered by your warranty. Notice: Modifications made to the engine, transmission, exhaust, intake - 2004 GMC Canyon | Owner's Manual - Page 156
off or improperly installed. A loose or missing fuel cap will allow fuel to evaporate into the atmosphere. A few driving trips with the cap properly installed should turn the light off. Did you just drive through a deep puddle of water? If so, your electrical system may be wet. The condition will - 2004 GMC Canyon | Owner's Manual - Page 157
fuel to turn the light off. If none of the above steps have made the light turn off, your dealer can check the vehicle. Your dealer has the proper test equipment and diagnostic tools to fix any mechanical or electrical problems that may have developed. Emissions Inspection and Maintenance Programs - 2004 GMC Canyon | Owner's Manual - Page 158
possible and have your vehicle serviced. Notice: Lack of proper engine oil maintenance may damage the engine. The repairs would not be covered by your warranty. Always follow the maintenance schedule in this manual for changing engine oil. The light goes on when you turn your key to ON or START. It - 2004 GMC Canyon | Owner's Manual - Page 159
briefly when you turn the key to START. The light will stay on until the engine starts. Cruise Control Light This symbol appears on your instrument panel whenever you set your cruise control. See "Cruise Control" under Turn Signal/Multifunction Lever on page 3-5. If the ignition is turned on, and - 2004 GMC Canyon | Owner's Manual - Page 160
Light This light turns on whenever the Daytime Running Lamps are on. Here are four things that some owners ask about. None of these indicate a problem with your fuel gage: • At the gas station, the gas pump off the ignition. When the fuel in the fuel tank is low, you will see a LOW FUEL message on - 2004 GMC Canyon | Owner's Manual - Page 161
such as the trip odometer, and personalization features. Trip Information Odometer The odometer is automatically displayed ignition is on. After a short delay the DIC will display the current driver and the information that was last displayed before the engine was turned off. If a problem - 2004 GMC Canyon | Owner's Manual - Page 162
when the vehicle is shifted into PARK (P) with an automatic transmission, or when the ignition key is removed on a manual transmission. Mode 2: Turns off the automatic door locks. Mode 3: Lock all doors when the vehicle is shifted out of PARK (P) with an automatic transmission, or when vehicle - 2004 GMC Canyon | Owner's Manual - Page 163
HOT message. ABS (Anti-Lock Brake System) This message will be displayed on the DIC if there is a problem with your antilock brake system. Check your antilock brake system as soon as possible and have your vehicle serviced. See Brakes on page 5-38 and Anti-Lock Brake System Warning Light on page - 2004 GMC Canyon | Owner's Manual - Page 164
have your vehicle serviced. See Engine Oil on page 5-13 and Scheduled Maintenance on page 6-4 for more information. Press the reset stem to acknowledge the message and clear it from the display. FLUID This message will be displayed on the DIC if your brake fluid is low. Check the brake fluid as soon - 2004 GMC Canyon | Owner's Manual - Page 165
when your oil pressure is low. See Oil Pressure Light on page 3-34, and Engine Oil on page 5-13 for more information. SERV (Service) 4WD (Four-Wheel Drive) This message will be displayed on your DIC when there is a problem with your transfer case control system. Check the transfer case on your - 2004 GMC Canyon | Owner's Manual - Page 166
a problem with your Traction Control System (TCS). Check your TCS as soon as possible and have your vehicle serviced. may interfere with the operation of your vehicle's engine, radio or other systems, and even damage equipment, check with your dealer and be sure to check federal rules covering mobile - 2004 GMC Canyon | Owner's Manual - Page 167
until the correct minute appears on the display. To display the time with the ignition off, press RCL, HR, or MIN and the time will appear on the the correct minute appears on the display. The time may be set with the ignition on or off. To synchronize the time with an FM station broadcasting Radio - 2004 GMC Canyon | Owner's Manual - Page 168
AM-FM Radio Finding a Station AM FM: Press this button to switch between FM1, FM2, or AM. The display will show your selection. TUNE or to decrease volume. RCL (Recall): Press this knob to switch the display between the radio station frequency and the time. Time display is available with the - 2004 GMC Canyon | Owner's Manual - Page 169
Setting Preset Stations The six numbered pushbuttons let you return to your favorite stations. You can set up to 18 stations (six FM1, six FM2, and six AM) by performing the following steps: 1. Turn the radio on. 2. Press AM FM to select FM1, FM2, or AM. 3. Tune in the desired station. 4. Press and - 2004 GMC Canyon | Owner's Manual - Page 170
press and hold the up or the down arrow to move the sound toward the front or the rear speakers. To adjust balance or fade to the middle position, to the dealer for service. LOC (Locked): This message is displayed when the Theftlock® system has locked up. Your vehicle must be returned to the dealer - 2004 GMC Canyon | Owner's Manual - Page 171
this button to select LOW, MEDIUM, or select OFF. DISPL (Display): Press this knob to switch the display between the radio station frequency and the appears on the display while using RDS. The display options are station name, RDS station frequency, PTY, and road and wind noise as you drive. 3-47 - 2004 GMC Canyon | Owner's Manual - Page 172
Finding a Station BAND: Press this button to switch between FM1, FM2, or AM. The display will show your selection. Setting Preset Stations The six numbered pushbuttons let you return to your favorite stations. - 2004 GMC Canyon | Owner's Manual - Page 173
classical. Selecting CUSTOM or changing bass or treble, returns the EQ to the manual bass and treble settings. The radio will save separate AUTO EQ settings for toward the right or the left speakers. To adjust the fade to the front and the rear speakers, push and release the AUDIO knob until FADE - 2004 GMC Canyon | Owner's Manual - Page 174
stations and will only work when the information is available. In rare cases, a radio station may broadcast incorrect information that will cause the radio features to work improperly. If this happens, contact the radio station. While you are tuned to an RDS station, the station name or the call - 2004 GMC Canyon | Owner's Manual - Page 175
for two seconds. AF ON will appear on the display. The radio may switch to stronger stations. To turn alternate frequency off, press and hold BAND again seconds. AF OFF will appear on the display. The radio will not switch to other stations. Setting Preset PTYs The six numbered pushbuttons let you - 2004 GMC Canyon | Owner's Manual - Page 176
will not be affected by tests of the emergency broadcast system. This feature is not supported by all RDS stations. INFO (Information): If the current station has a announcement even if the volume is low. Your radio will interrupt the play of a CD if the last tuned station - 2004 GMC Canyon | Owner's Manual - Page 177
locked up. You must return to the dealer for service. As each new track starts to play, the track number will appear on the display. The CD player can play the small 8 cm single CDs with an adapter ring. Full-size difficulty in loading and ejecting. If these problems occur try a known good CD. Do - 2004 GMC Canyon | Owner's Manual - Page 178
1 PREV (Previous): Press this pushbutton to go to the start of the current track if it has been playing for more than eight seconds. TRACK and the track number will appear on the display. If you hold this pushbutton or press it more than once, the player will continue moving backward through the CD. - 2004 GMC Canyon | Owner's Manual - Page 179
beep. Use this feature to listen to 10 road. When the road becomes smooth, the CD should play. • The CD is dirty, scratched, wet, or upside down. • The air is very humid. If so, wait about an hour and try again. • There may have been a problem dealer when reporting the problem. Z (Eject): Press - 2004 GMC Canyon | Owner's Manual - Page 180
volume, your audio system will adjust automatically to make up for road and wind noise as you drive. Set the volume at the desired level. Press Recall): Press this knob to switch the display between the radio station frequency and the time. Press this knob with the ignition off to display the time. - 2004 GMC Canyon | Owner's Manual - Page 181
Finding a Station BAND: Press this button to switch between FM1, FM2, AM. The display will show your selection. TUNE: Turn this knob to select radio stations. Press the right or the left arrow - 2004 GMC Canyon | Owner's Manual - Page 182
sound toward the right or the left speakers. To adjust the fade to the front and the rear speakers, push and release the AUDIO knob until FADE appears on the display. Turn the knob to move the sound toward the front or the rear speakers. To adjust the balance and fade to the middle - 2004 GMC Canyon | Owner's Manual - Page 183
1. If both P-TYPE and TRAF are on, the radio will search for stations with the selected PTY and traffic announcements. To use the PTY interrupt feature, press and hold the P-TYPE button until you hear a beep on the PTY you want to interrupt with. When selected, an asterisk will appear beside - 2004 GMC Canyon | Owner's Manual - Page 184
for two seconds. AF ON will appear on the display. The radio may switch to stronger stations. To turn alternate frequency off, press and hold BAND again seconds. AF OFF will appear on the display. The radio will not switch to other stations. Setting Preset PTYs The six numbered pushbuttons let you - 2004 GMC Canyon | Owner's Manual - Page 185
! will not be affected by tests of the emergency broadcast system. This feature is not supported by all RDS stations. INFO (Information): If the current station has a . Your radio will play the traffic announcement even if the volume is low. Your radio will interrupt the play of a CD if the last tuned - 2004 GMC Canyon | Owner's Manual - Page 186
with an adapter ring. Full-size CDs and the smaller CDs are tracks and/or difficulty in loading and ejecting. If these problems occur try a known good CD. Do not add paper the following: 1. Turn the ignition on. 2. Press and release the LOAD button. 3. Wait for the light, located to the right of the - 2004 GMC Canyon | Owner's Manual - Page 187
for two seconds. You will hear a beep and the light will flash to let you know when a CD is CD after you have tried to push it in manually. The receivers 25-second eject timer will reset at and then on again. This will clear the CD-sensing feature and enable CDs to be loaded into the player again. - 2004 GMC Canyon | Owner's Manual - Page 188
one CD, press and hold either SCAN arrow for more than two seconds until SCAN appears on the display and you hear a beep. Use this feature to listen to 10 seconds of each track of the currently selected CD. Press either SCAN arrow again, to stop scanning. 3-64 - 2004 GMC Canyon | Owner's Manual - Page 189
CD SCAN appears on the display and you hear a beep. Use this feature to listen to 10 seconds of the first track of each CD feature, perform the following steps: 1. Turn the CD player on and load it with at least one CD. See "LOAD CD" listed previously in this section for more information. 2. Check - 2004 GMC Canyon | Owner's Manual - Page 190
To play the song list, press the SONG LIST button. One beep will be heard and S-LIST will appear on the display. The recorded tracks will begin to play in the order that they were saved. You may seek through the song list by using the SEEK SCAN arrows. Seeking past the last saved track will return - 2004 GMC Canyon | Owner's Manual - Page 191
. When the road becomes smooth, the CD should play. • The CD is dirty, scratched, wet, or upside down. • The air is very humid. If so, wait about an hour and try again. • There may have been a problem while burning the CD. Theft-Deterrent Feature (RDS Radios) THEFTLOCK® is designed to discourage - 2004 GMC Canyon | Owner's Manual - Page 192
up noise from things like storms and power lines. Try reducing the treble to reduce this noise. Care the mast is badly bent, you should replace it. Check occasionally to be sure the mast is still tightened level, press and hold pushbutton 6 with the ignition on and the radio power off. The chime - 2004 GMC Canyon | Owner's Manual - Page 193
...4-52 Truck-Camper Loading Information ...4-59 Trailer Recommendations ...4-59 Pickup Conversion to Chassis Cab ...4-59 Towing a Trailer ...4-60 Your Driving, the Road, and Your Vehicle ...4-2 Defensive Driving ...4-2 Drunken Driving ...4-3 Control of a Vehicle ...4-6 Braking ...4-6 Traction - 2004 GMC Canyon | Owner's Manual - Page 194
driving really means "be ready for anything." On city streets, rural roads or freeways, it means "always expect the unexpected." Assume that pedestrians rural driving. You never know when the vehicle in front of you is going to brake or turn suddenly. Defensive driving requires that a driver - 2004 GMC Canyon | Owner's Manual - Page 195
for these laws. The obvious way to eliminate the leading highway safety problem is for people never to drink alcohol and then drive. But what if injured. • The amount of alcohol consumed • The drinker's body weight • The amount of food that is consumed before and during drinking • The length - 2004 GMC Canyon | Owner's Manual - Page 196
the person's BAC would be close to 0.12 percent. A person who consumes food just before or during drinking will have a somewhat lower BAC level. . Women generally have a lower relative percentage of body water than men. Since alcohol is carried in body water, this means that a woman generally will - 2004 GMC Canyon | Owner's Manual - Page 197
is 12 times greater; at a level of 0.15 percent, the chance is 25 times greater! The body takes about an hour to rid itself of the alcohol in one drink. No amount of coffee or a driver who has been drinking. Ride home in a cab; or if you are with a group, designate a driver who will not drink. 4-5 - 2004 GMC Canyon | Owner's Manual - Page 198
meet the road. Braking Braking action involves perception time and reaction time. First, you have to decide to push on the brake pedal. That with another. Age, physical condition, alertness, coordination and eyesight all play a part. So do alcohol, drugs and frustration. But even in 3/4 of a second - 2004 GMC Canyon | Owner's Manual - Page 199
skid. When you start your engine and begin to drive away, your anti-lock brake system will check itself. You may hear a momentary motor or clicking noise while this test is going on. This is normal. If there is a problem with the anti-lock brake system, this warning light will stay on. See Anti - 2004 GMC Canyon | Owner's Manual - Page 200
can help you steer around the obstacle while braking hard. Let us say the road is wet and you are driving safely. Suddenly, an animal jumps out in front of you. You slam on the brakes and continue braking. Here is what happens with ABS: A computer senses that wheels are slowing down. If one of the - 2004 GMC Canyon | Owner's Manual - Page 201
. When this happens, the system reduces engine power and may also upshift the transmission to limit wheel spin. You may feel or hear the system working, but this is normal. Using Anti-Lock Do not pump the brakes. Just hold the brake pedal down firmly and let anti-lock work for you. You may feel the - 2004 GMC Canyon | Owner's Manual - Page 202
or Manual Transmission Operation on page 2-24 for more information. If there is a problem Steering If you lose power steering assist because the engine stops or the system is not functioning, you can the road surface makes it possible for the vehicle to change its path when you turn the front wheels. - 2004 GMC Canyon | Owner's Manual - Page 203
on good weather and road conditions. Under less the curve, while your front wheels are straight ahead. Try to truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you. You can avoid these problems by braking - 2004 GMC Canyon | Owner's Manual - Page 204
wheels have dropped off the edge of a road onto the shoulder while you are driving. An emergency like this requires close attention and a quick decision. If you are holding the steering wheel wheel up to one-quarter turn until the right front tire contacts the pavement edge. Then turn your steering - 2004 GMC Canyon | Owner's Manual - Page 205
here are some tips for passing: • "Drive ahead." Look down the road, to the sides and to crossroads for situations that might affect your passing out to pass the slow vehicle. Remember to glance over your shoulder and check the blind spot. • Watch for traffic signs, pavement markings and lines. - 2004 GMC Canyon | Owner's Manual - Page 206
farther away from you than it really is.) Loss of Control Let us review what driving experts say about what happens when the three control systems (brakes, steering and acceleration) do not have enough friction where the tires meet the road to do what the driver has asked. In any emergency, do not - 2004 GMC Canyon | Owner's Manual - Page 207
steering, acceleration or braking (including engine braking by shifting to road to make a "mirrored surface" - and slow down when you have any doubt. Remember: Any anti-lock brake system (ABS) helps avoid only the braking skid. Off-Road Driving with Your Four-Wheel-Drive Vehicle This off-road guide - 2004 GMC Canyon | Owner's Manual - Page 208
maintenance and service work done. Check to make sure all underbody shields (if so equipped) are properly attached. Be sure you read all the information about your four-wheel-drive vehicle in this manual. Is there enough fuel forward and low as possible. • Loading Your Vehicle for Off-Road Driving - 2004 GMC Canyon | Owner's Manual - Page 209
. Does your vehicle have a winch? If so, be sure to read the winch instructions. In a remote area, a winch can be handy if you get stuck. But you (this includes wheel-spinning, breaking down trees or unnecessary driving through streams or over soft ground). • Always carry a litter bag - make sure - 2004 GMC Canyon | Owner's Manual - Page 210
engine sounds. With your arms, hands, feet and body, you will need to respond to vibrations and vehicle bounce. Controlling your vehicle is the key to successful off-road more distance for braking, especially since you are on an unpaved surface. {CAUTION: When you are driving off-road, bouncing and - 2004 GMC Canyon | Owner's Manual - Page 211
a firm grip on the steering wheel. Ruts, troughs or other surface features can jerk the wheel out of your hands if you are braking. In a way, off-road driving requires a different kind of alertness from driving on paved roads and highways. There are no road signs, posted speed limits or signal lights - 2004 GMC Canyon | Owner's Manual - Page 212
Driving on Off-Road Hills Off-road driving often takes you up, down or across a hill. Driving safely on hills requires good judgment and an understanding of what your vehicle can and - 2004 GMC Canyon | Owner's Manual - Page 213
visible to approaching traffic on trails or hills. • Use a low gear and get a firm grip on the steering wheel. • Sound the horn as you approach the top of the not use more power than you need, because you do not want your wheels to start spinning or sliding. • Use your headlamps even during the day - 2004 GMC Canyon | Owner's Manual - Page 214
than in the left or right direction. Turning the wheel too far to the left or right will increase the possibility of a rollover. 4-22 A: Set the parking brake, put your transmission in PARK (P) (or the manual transmission in FIRST (1)) and turn off the engine. Leave the vehicle and go get some help - 2004 GMC Canyon | Owner's Manual - Page 215
-wheeling." Your brakes will have to do all the work and could overheat and fade. {CAUTION: Heavy braking when going down a hill can cause your brakes to overheat and fade. This could cause loss of control and a serious accident. Apply the brakes lightly when descending a hill and use a low gear - 2004 GMC Canyon | Owner's Manual - Page 216
puts more weight on the downhill wheels. This could cause a downhill slide or a rollover. • Shift back to a low gear, release the parking brake, and drive straight down. • If the engine will not start, get out and get help. • Surface conditions can be a problem when you drive across a hill. Loose - 2004 GMC Canyon | Owner's Manual - Page 217
• Hidden obstacles can make the steepness of the incline even worse. If you drive across a rock with the uphill wheels, or if the downhill wheels drop into a rut or depression, your vehicle can tilt even more. For reasons like these, you need to decide carefully whether to try to drive - 2004 GMC Canyon | Owner's Manual - Page 218
you (and your passengers) get out on the uphill side, even if the door there is harder to open. If you get out on the downhill side and will take if it does roll over. {CAUTION: Getting out on the downhill (low) side of a vehicle stopped across an incline is dangerous. If the vehicle rolls over - 2004 GMC Canyon | Owner's Manual - Page 219
, Snow or Ice When you drive in mud, snow or sand, your wheels will not get good traction. You can not accelerate as quickly, turning is more difficult, and you will need longer braking distances. It is best to use a low gear when you are in mud - the deeper the mud, the lower - 2004 GMC Canyon | Owner's Manual - Page 220
water is before you drive through it. If it is deep enough to cover your wheel hubs, axles or exhaust pipe, do not try it - you probably will not get through. Also, water that deep can damage your axle and other vehicle parts. If the water is not too deep, drive slowly through it. At - 2004 GMC Canyon | Owner's Manual - Page 221
and uneven braking. Check the body structure, steering, suspension, wheels, tires and exhaust system for damage. Also, check the fuel lines and cooling system for any leakage. Your vehicle will require more frequent service due to off-road use. Refer to the maintenance schedule for additional - 2004 GMC Canyon | Owner's Manual - Page 222
mirror to reduce the glare from headlamps behind you. Your eyes will have less trouble dimly lighted objects. Just as your headlamps should be checked regularly roads. Your headlamps can light up only so much road ahead. • In remote areas, watch for animals. • If you are tired, pull off the road - 2004 GMC Canyon | Owner's Manual - Page 223
they show signs of streaking or missing areas on the windshield, or when strips of rubber start to separate from the inserts. Rain and wet roads can mean driving trouble. On a wet road, you can not stop, accelerate or turn as well because your tire-to - 2004 GMC Canyon | Owner's Manual - Page 224
through a large puddle of water or a car wash, apply your brake pedal lightly until your brakes work normally. Driving too fast through large water puddles or even going through some car washes can cause problems, too. The water may affect your brakes. Try to avoid puddles. But if you can not, try - 2004 GMC Canyon | Owner's Manual - Page 225
or if the pressure in one or more is low. It can happen if a lot of water is standing on the road. If you can see reflections from trees, or standing water, water can come in through your engine's air intake and badly damage your engine. Never drive through water that is slightly lower than the - 2004 GMC Canyon | Owner's Manual - Page 226
going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross-country trip. light turns green, and just before you start to move, check both ways for vehicles that have not cleared the intersection or may be running the red light. One of the biggest problems - 2004 GMC Canyon | Owner's Manual - Page 227
the gap at close to the prevailing speed. Switch on your turn signal, check your mirrors and glance over your shoulder as often as mirrors. Then use your turn signal. Mile for mile, freeways (also called thruways, parkways, expressways, turnpikes or superhighways) are the safest of all roads - 2004 GMC Canyon | Owner's Manual - Page 228
day's work - do not plan to make too many miles that first part of the journey. Wear comfortable clothing and shoes you can easily drive in. Is serviced and maintained, it is ready to go. If it needs service, have it done before starting out. Of course, you will find experienced and able service - 2004 GMC Canyon | Owner's Manual - Page 229
is well ventilated, with a comfortably cool interior. • Maps: Do you have up-to-date maps? • Keep your eyes moving. Scan the road ahead and to the sides. Check your mirrors and your instruments frequently. • If you get sleepy, pull off the road into a rest, service or parking area and take a nap - 2004 GMC Canyon | Owner's Manual - Page 230
enjoyable. See Off-Road Driving with Your Four-Wheel-Drive Vehicle on page 4-15 for information about driving off-road. • Keep your vehicle in good shape. Check all fluid levels and also the brakes, tires, cooling system and transmission. These parts can work hard on mountain roads. • Know how to - 2004 GMC Canyon | Owner's Manual - Page 231
NEUTRAL (N) or with the ignition off is dangerous. Your brakes will have to do all the work of slowing down. They could get so hot that they would not work well. You would then have poor braking or even none going down a hill. You could crash. Always have your engine running and your vehicle - 2004 GMC Canyon | Owner's Manual - Page 232
a red cloth and a couple of reflective warning triangles. And, if you will be driving under severe conditions, include a small bag of sand, a piece of old carpet or a couple of burlap bags to help provide traction. Be sure you properly secure these items in your vehicle. Driving on Snow or Ice Most - 2004 GMC Canyon | Owner's Manual - Page 233
. If you accelerate too fast, the drive wheels will spin and polish the surface under the tires even more. Your anti-lock brakes improve your vehicle's stability when you make a hard stop on a slippery road. Even though you have an anti-lock braking system, you will want to begin stopping sooner - 2004 GMC Canyon | Owner's Manual - Page 234
clothing or wrap a blanket around you. If you have no blankets or extra clothing, make body insulators from newspapers, burlap bags, rags, floor mats - anything you can wrap around yourself or tuck under your clothing been stopped by the snow. 4-42 You can run the engine to keep warm, but be careful. - 2004 GMC Canyon | Owner's Manual - Page 235
as long as you must. This saves fuel. When you run the engine, make it go a little faster than just idle. That is, push the accelerator slightly. This uses less fuel for the heat that you get and it keeps the battery charged. You will need a well-charged battery to restart the vehicle, and possibly - 2004 GMC Canyon | Owner's Manual - Page 236
. CAUTION: (Continued) That could cause an engine compartment fire or other damage. When you are stuck, spin the wheels as little as possible. Do not spin the wheels above 35 mph (55 km/h) as shown on the speedometer. Notice: Spinning your wheels can destroy parts of your vehicle as well as the - 2004 GMC Canyon | Owner's Manual - Page 237
manual transmission, between FIRST (1) or SECOND (2) and REVERSE (R)), spinning the wheels as little as possible. Release the accelerator pedal while you shift, and press lightly hooks are provided at the front of your vehicle. You may need to use them if you are stuck off-road and need to be pulled - 2004 GMC Canyon | Owner's Manual - Page 238
out. Never pull on the hooks at a sideways angle. The hooks could break off and you or others could be injured from the chain or cable snapping back. Notice: Never use recovery hooks to tow the vehicle. Your vehicle could be damaged and it would not be - 2004 GMC Canyon | Owner's Manual - Page 239
Your Vehicle Consult your dealer or a professional towing service if you need to have your disabled vehicle towed as "dinghy (towing your vehicle with all four wheels on the ground) and "dolly (towing your vehicle with two wheels on the ground and two wheels up on a device known as a "dolly"). - 2004 GMC Canyon | Owner's Manual - Page 240
PARK (P) or a manual transmission in FIRST (1). 4. Securely attach the vehicle being towed to the tow vehicle. {CAUTION: Two-Wheel Drive Vehicles Notice: If you tow your vehicle with all four wheels on the ground, the drivetrain components could be damaged. The repairs would not be covered by your - 2004 GMC Canyon | Owner's Manual - Page 241
Four-Wheel Drive on page 2-26 for more information. 6. Release the parking brake only ignition to LOCK. To prevent your battery from draining while towing, remove the RDO BATT and CLSTR fuses from the instrument panel fuse block. Be sure to replace the fuse when you reach your destination. See Fuses - 2004 GMC Canyon | Owner's Manual - Page 242
90 km/h) while towing your vehicle. 7. Turn the ignition to LOCK. To prevent your battery from draining while towing, remove the RDO BATT and CLSTR fuses from the instrument panel fuse block. Be sure to replace the fuse when you reach your destination See Fuses and Circuit Breakers on page 5-104 for - 2004 GMC Canyon | Owner's Manual - Page 243
vehicle is in gear, for a manual transmission. You or others could be injured. Make sure the parking brake is firmly set before you shift the transfer case to NEUTRAL. 5. Shift the transfer case to 2HI. See Four-Wheel Drive on page 2-26 for instructions. Four-Wheel-Drive Vehicles Use the following - 2004 GMC Canyon | Owner's Manual - Page 244
90 km/h) while towing your vehicle. 7. Turn the ignition to LOCK. To prevent your battery from draining while towing, remove the RDO BATT and CLSTR fuses from the instrument panel fuse block. Be sure to replace the fuse when you reach your destination See Fuses and Circuit Breakers on page 5-104 for - 2004 GMC Canyon | Owner's Manual - Page 245
the door latch post. Vehicle's without a center pillar, extended cab models , will have the Tire and Loading Information label attached to the edge of the driver's side third door, above the door cation/Tire label shows the tire size and recommended inflation pressures needed to obtain - 2004 GMC Canyon | Owner's Manual - Page 246
capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, the load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. See Towing a Trailer on page 4-60 for important - 2004 GMC Canyon | Owner's Manual - Page 247
Example 2 Example 3 Loading Your Vehicle Item A B C Description Vehicle Capacity Weight for Example 2 = Subtract Occupant Weight 150 lbs (68 kg) x 5 = Available Cargo Weight = Total 1,000 lbs (453 kg) 750 lbs (340 kg) 250 lbs (113 kg) Item A B C Loading Your Vehicle Description Vehicle Capacity - 2004 GMC Canyon | Owner's Manual - Page 248
, on the driver's side of the vehicle. Vehicles without a center pillar, extended cab models, will have the Certification/Tire label attached to the edge of the driver's side, third door, below the door latch post. The label shows the size of your original tires and the inflation pressures needed to - 2004 GMC Canyon | Owner's Manual - Page 249
may cause damage. Repairs would not be covered by your warranty. Do not overload your road driving in this manual. See "Loading Your Vehicle for Off-Road Driving" under Off-Road Driving with Your Four-Wheel of the occupants as part of your load. If you added any accessories or equipment after your - 2004 GMC Canyon | Owner's Manual - Page 250
must be inserted in the pickup box depressions. The length of the planks must allow for at least a 3/4 inch (2 cm) bearing surface on each end of the Notice: Overloading your vehicle may cause damage. Repairs would not be covered by your warranty. Do not overload your vehicle. Remember not to exceed the - 2004 GMC Canyon | Owner's Manual - Page 251
Truck-Camper Loading Information Your vehicle was not designed to carry a slide-in camper. Pickup Conversion to Chassis Cab General Motors is aware that some vehicle owners may consider having the pickup box removed and a commercial or recreational body installed. However, we recommend that - 2004 GMC Canyon | Owner's Manual - Page 252
braking, durability and fuel economy. Successful, safe trailering takes correct equipment, and it has to be used properly. That's the reason for this part costly repairs that would not be covered by your warranty. Always follow the instructions in this section and check with your dealer for more - 2004 GMC Canyon | Owner's Manual - Page 253
road options your engine and other parts of your vehicle wear in at the heavier loads. • You may want to shift the transmission to THIRD (3) or, if necessary, a lower gear selection if the transmission shifts too often (e.g., under heavy loads and/or hilly conditions). If you have a manual - 2004 GMC Canyon | Owner's Manual - Page 254
* 2WD Regular Cab Automatic Transmission, 2.8 L Engine Automatic Transmission, 3.5 L Engine Automatic Transmission, 3.5 L Engine Manual Transmission, 2.8 L Engine Manual Transmission, 2.8 L Engine Manual Transmission, 3.5 L Engine Manual Transmission, 3.5 L Engine Vehicle* 2WD Extended Cab Automatic - 2004 GMC Canyon | Owner's Manual - Page 255
Vehicle* Automatic Transmission, 3.5 L Engine Manual Transmission, 2.8 L Engine Manual Transmission, 2.8 L Engine Manual Transmission, 3.5 L Engine Manual Transmission, 3.5 L Engine Vehicle* 2WD Crew Cab ® Axle Ratio 3.73 3.42 3.73 3.42 3.73 Maximum Trailer Weight 4,000 lbs. (1 814 kg) 1,700 lbs. - 2004 GMC Canyon | Owner's Manual - Page 256
Cab Automatic Transmission, 2.8 L Engine Automatic Transmission, 2.8 L Engine Automatic Transmission, 3.5 L Engine Automatic Transmission, 3.5 L Engine Automatic Transmission, 3.5 L Engine Manual Transmission, 2.8 L Engine Manual Transmission, 2.8 L Engine Manual Transmission, 3.5 L Engine Manual - 2004 GMC Canyon | Owner's Manual - Page 257
Extended Cab Automatic Transmission, 2.8 L Engine Automatic Transmission, 2.8 L Engine Automatic Transmission, 3.5 L Engine Automatic Transmission, 3.5 L Engine Automatic Transmission, 3.5 L Engine Manual Transmission, 2.8 L Engine Manual Transmission, 3.5 L Engine Manual Transmission, 3.5 L Engine - 2004 GMC Canyon | Owner's Manual - Page 258
Vehicle* 4WD Crew Cab ® Axle Ratio Maximum Trailer Weight GCWR** Automatic Transmission, 2.8 L Engine Automatic Transmission, 2.8 L Engine Automatic Transmission, 3.5 L Engine Automatic Transmission, 3.5 L Engine Automatic Transmission, 3.5 L Engine Manual Transmission, 2.8 L Engine 3.73 4.10 - 2004 GMC Canyon | Owner's Manual - Page 259
of the vehicle, any cargo you may carry in it, and the people who will be riding in the vehicle. If you have a lot of options, equipment, passengers or cargo in your vehicle, it will reduce the tongue weight your vehicle can carry, which will also reduce the trailer weight your - 2004 GMC Canyon | Owner's Manual - Page 260
Hitches You can use your step bumper hitch for trailers up to 2,000 lbs the rear edge of the driver's door above the door latch, or see Loading Your the road if it becomes separated from the hitch. Instructions about safety trucks going by and rough roads are a few reasons why you'll need the - 2004 GMC Canyon | Owner's Manual - Page 261
and not nearly as responsive as your vehicle is by itself. Before you start, check all trailer hitch parts and attachments, safety chains, electrical connector, lamps, tires and mirror adjustment. If the trailer has electric brakes, start your vehicle and trailer moving and then apply the trailer - 2004 GMC Canyon | Owner's Manual - Page 262
help you avoid situations that require heavy braking and sudden turns. Making Turns Notice trailer won't strike soft shoulders, curbs, road signs, trees or other objects. Avoid jerky check occasionally to be sure the trailer bulbs are still working. Backing Up Hold the bottom of the steering wheel - 2004 GMC Canyon | Owner's Manual - Page 263
on level ground) with the automatic transmission in PARK (P) (or the manual transmission out of gear and the parking brake applied) for a few minutes before turning the engine off. If you do get the overheat warning, see Engine Overheating on page 5-28. Parking on Hills {CAUTION: You really should - 2004 GMC Canyon | Owner's Manual - Page 264
a trailer. See Scheduled Maintenance on page 6-4 for more on this. Things that are especially important in trailer operation are automatic transmission fluid (don't overfill), engine oil, axle lubricant, belt, cooling system and brake system. Each of these is covered in this manual, and the Index - 2004 GMC Canyon | Owner's Manual - Page 265
5 Service and Appearance Care Engine Overheating ...5-28 Cooling System ...5-30 Engine Fan Noise ...5-35 Power Steering Fluid ...5-36 Windshield Washer Fluid ...5-37 Brakes ...5-38 Battery ...5-41 Jump Starting ...5-42 Rear Axle ...5-47 Four-Wheel Drive ...5-48 Front Axle ...5-49 Bulb Replacement - 2004 GMC Canyon | Owner's Manual - Page 266
Service Parts Identification Label ...5-103 Electrical System ...5-103 Add-On Electrical Equipment ...5-103 Windshield Wiper Fuses ...5-104 Power Windows and Other Power Options ...5-104 Fuses Tire Quality Grading ...5-69 Wheel Alignment and Tire Balance ...5-70 Wheel Replacement ...5-70 Tire Chains - 2004 GMC Canyon | Owner's Manual - Page 267
service needs. You will get genuine GM parts and GM-trained and supported service people. We hope you will want to keep your GM vehicle all GM. Genuine GM parts cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems (including some inside the vehicle), many - 2004 GMC Canyon | Owner's Manual - Page 268
proper service manual, see Service Publications Ordering Information on page 7-11. Your vehicle has an air bag system. Before attempting to do your own service work, see Servicing Your Air Bag-Equipped Vehicle on page 1-72. You should keep a record with all parts receipts and list the mileage and - 2004 GMC Canyon | Owner's Manual - Page 269
damage your engine. A little pinging noise when you accelerate or drive uphill is considered normal. This does not indicate a problem exists or that a higher-octane fuel is necessary. If you are using 87 octane or higher-octane fuel and hear heavy knocking, your engine needs service. Canada Only - 2004 GMC Canyon | Owner's Manual - Page 270
a smog-check test. If fuel used, repairs may not be covered by your warranty. Additives To provide cleaner air, all gasolines in the United States are now required to contain additives that will help prevent engine and fuel fuel injectors and intake valves clean. If your vehicle experiences problems - 2004 GMC Canyon | Owner's Manual - Page 271
, return to your authorized GM dealer for service. Filling Your Tank {CAUTION: Fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off your engine when you are refueling. Do not - 2004 GMC Canyon | Owner's Manual - Page 272
The tethered fuel cap is located behind a hinged door on the driver's side of your vehicle. While refueling, hang the cap by the tether from the hook on the fuel filler door. To remove the fuel cap, turn it slowly to the left (counterclockwise). 5-8 - 2004 GMC Canyon | Owner's Manual - Page 273
. The diagnostic system can determine if the fuel cap has been left off or improperly installed. This would allow fuel to evaporate into the atmosphere. If the fuel cap is not properly installed, FUEL CAP will appear on the DIC and the check engine light will be lit on instrument panel cluster. See - 2004 GMC Canyon | Owner's Manual - Page 274
. Contact should be maintained until the filling is complete. • Do not smoke while pumping gasoline. {CAUTION: Things that burn can get on hot engine parts and start a fire. These include liquids like fuel, oil, coolant, brake fluid, windshield washer and other fluids, and plastic or rubber. You or - 2004 GMC Canyon | Owner's Manual - Page 275
into the slot in the hood. Before closing the hood, be sure all the filler caps are on properly. Then lift the hood to relieve pressure on the hood prop. Remove the hood prop from the slot latch on the hood. The secondary latch is located below the front center of the hood. 3. Lift the hood. 5-11 - 2004 GMC Canyon | Owner's Manual - Page 276
Engine Compartment Overview When you open the hood on the 2.8 L engine, you'll see: 2.8 L engine shown. 3.5 L engine similar 5-12 - 2004 GMC Canyon | Owner's Manual - Page 277
Reservoir. See Brakes on page 5-38. G. Battery. See Battery on page 5-41. H. Hydraulic Clutch Fluid Reservoir (If Equipped). See Hydraulic Clutch (Manual Transmission) on page 5-24. I. Engine Air Cleaner/Filter. See Engine Air Cleaner/ Filter on page 5-18. J. Engine Oil Fill Cap. See Engine Oil on - 2004 GMC Canyon | Owner's Manual - Page 278
Overview on page 5-12 for the location of the engine oil fill cap. When to Add Engine Oil If the oil is at or below the cross-hatched area (L), then you will need to add at least one quart of oil. But - 2004 GMC Canyon | Owner's Manual - Page 279
on the oil container, and use only those oils that are identified as meeting GM Standard GM6094M and have the starburst symbol on the front of the oil container. sup® 5-15 - 2004 GMC Canyon | Owner's Manual - Page 280
protection for your engine at extremely low temperatures. When to Change Engine Oil (GM Oil Life System) Your vehicle has a computer system that lets you know when to change the engine oil and filter. This is based on engine revolutions and engine temperature, and not on mileage. Based on driving - 2004 GMC Canyon | Owner's Manual - Page 281
. 3. Turn the key to LOCK. If the CHANGE OIL message comes back on when you start your vehicle, the engine oil life system has bodies of water. Instead, recycle it by taking it to a place that collects used oil. If you have a problem properly disposing of your used oil, ask your dealer, a service - 2004 GMC Canyon | Owner's Manual - Page 282
to Inspect the Engine Air Cleaner/Filter To remove the engine air cleaner/filter, do the following: 1. Unfasten the clips that hold the cover on and remove the cover. 2. Lift out the engine air cleaner/filter. 3. Inspect or replace the air filter. See Normal Maintenance Replacement Parts on page 6-15 - 2004 GMC Canyon | Owner's Manual - Page 283
engine, which will damage it. Always have the air cleaner/filter in place when you are driving. When to Check and Change A good time to check your automatic transmission fluid level is when the engine • Uses such as found in taxi, police or delivery service. If you do not use your vehicle under any of - 2004 GMC Canyon | Owner's Manual - Page 284
are 50°F (10°C) or more. If it's colder than 50°F (10°C), you may have to idle the engine longer. Should the fluid level be low during this cold check, you must check the fluid hot before adding fluid. Checking the fluid hot will give you a more accurate reading of the fluid level. When outside - 2004 GMC Canyon | Owner's Manual - Page 285
the engine running. • With the parking brake applied, place the shift lever in PARK (P). • With your foot on the brake pedal, engine run at idle for three minutes or more. Then, without shutting off the engine, follow these steps: The transmission dipstick handle has this symbol on it. 3. Check - 2004 GMC Canyon | Owner's Manual - Page 286
the engine oil is changed. However, the fluid in your manual transmission doesn't require changing. How to Check Because this operation can be a little difficult, you may choose to have this done at your GM dealership service department. If you do it yourself, be sure to follow all the instructions - 2004 GMC Canyon | Owner's Manual - Page 287
to Add Fluid Here's how to add fluid. Refer to the Maintenance Schedule to determine what kind of fluid to use. See Recommended Fluids and filler plug. Be sure the plug is fully seated. 1. Remove the filler plug. 2. Check that the lubricant level is up to the bottom of the filler plug hole. 3. If the - 2004 GMC Canyon | Owner's Manual - Page 288
this system could indicate a problem. Have the system inspected and repaired. Refer to the Maintenance Schedule to determine how often you should check the fluid level in your clutch master cylinder reservoir and for the proper fluid. See Owner Checks and Services on page 6-9 and Recommended Fluids - 2004 GMC Canyon | Owner's Manual - Page 289
(240 000 km), whichever occurs first, if you add only DEX-COOL® extended life coolant. The following explains your cooling system and how to add coolant when it is low. If you have a problem with engine overheating, see Engine Overheating on page 5-28. A 50/50 mixture of clean, drinkable water and - 2004 GMC Canyon | Owner's Manual - Page 290
could overheat and be badly damaged. The repair cost would not be covered by your warranty. Too much water in the mixture can freeze and crack the engine, radiator, heater core and other parts. Notice: If you use the proper coolant, you do not have to add extra inhibitors or additives which claim - 2004 GMC Canyon | Owner's Manual - Page 291
Checking Coolant Adding Coolant If you need more coolant, add the proper DEX-COOL® coolant mixture at the coolant recovery tank. {CAUTION: Turning the radiator pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly. With the coolant - 2004 GMC Canyon | Owner's Manual - Page 292
will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. Occasionally check the coolant level in the radiator. For information on how to add coolant to the radiator, see Cooling System on page 5-30. If Steam Is Coming From Your Engine Radiator Pressure Cap Notice: If the - 2004 GMC Canyon | Owner's Manual - Page 293
or so: 1. In heavy traffic, let the engine idle in NEUTRAL while stopped. If it is safe to do so, pull off the road, shift to PARK (P) or NEUTRAL and let the engine idle. 2. Turn off the air conditioning. 3. Turn on your heater to full hot at the highest fan speed and open the window as necessary - 2004 GMC Canyon | Owner's Manual - Page 294
until it cools down. You may decide not to lift the hood but to get service help right away. Cooling System When you decide it's safe to lift the hood, here's what you'll see: A. Coolant Recovery Tank B. Engine Cooling Fan C. Radiator Pressure Cap If the coolant inside the coolant recovery tank is - 2004 GMC Canyon | Owner's Manual - Page 295
leak, start the engine again. The engine cooling fan speed should increase when idle speed is doubled by pushing the accelerator pedal down. If it doesn't, your vehicle needs service. Turn off the engine. Notice: Engine damage from running your engine without coolant is not covered by your warranty - 2004 GMC Canyon | Owner's Manual - Page 296
problem yet, but the coolant level isn't at the FULL COLD mark, add a 50/50 mixture of clean, drinkable water and DEX-COOL® engine coolant at the coolant recovery tank. See Engine , water can freeze and crack the engine, radiator, heater core and other parts. Use the recommended coolant and the - 2004 GMC Canyon | Owner's Manual - Page 297
under pressure, and if you turn the radiator pressure cap - even a little - they can come out at high speed. Never turn the cap when the cooling system, including the radiator pressure cap, is hot. Wait for the cooling system and radiator pressure cap to cool if you ever have to turn the pressure - 2004 GMC Canyon | Owner's Manual - Page 298
to stop. A hiss means there is still some pressure left. 2. Then keep turning the cap to remove it. 3. Fill the radiator with the proper DEX-COOL® coolant mixture, up to the base of the filler neck. See Engine Coolant on page 5-25 for more information about the proper coolant mixture. 4. Then fill - 2004 GMC Canyon | Owner's Manual - Page 299
Engine Fan Noise This vehicle has a clutched engine cooling fan. When the clutch is engaged, the fan spins faster to provide more air to cool the engine. In most everyday driving conditions, the clutch is not engaged. This improves fuel economy and reduces fan noise. Under heavy vehicle loading, - 2004 GMC Canyon | Owner's Manual - Page 300
Fluid How to Check Power Steering Fluid 1. Turn the key off and let the engine compartment cool down. 2. Wipe the cap and the top of the reservoir clean. 3. Unscrew the cap and wipe the dipstick with a clean rag. 4. Replace the cap and completely tighten it. 5. Then remove the cap again and look - 2004 GMC Canyon | Owner's Manual - Page 301
using concentrated washer fluid, follow the manufacturer's instructions for adding water. • Do not mix parts of the washer system. Also, water does not clean as well as washer fluid. Adding Washer Fluid Open the cap with the washer symbol on it. Add washer fluid until the tank is full. See Engine - 2004 GMC Canyon | Owner's Manual - Page 302
done on the brake hydraulic system. See "Checking Brake Fluid" in this section. Refer to the Maintenance Schedule to determine when to check your brake fluid. See Scheduled Maintenance on page 6-4. Your brake master cylinder reservoir is filled with DOT-3 brake fluid. See Engine Compartment Overview - 2004 GMC Canyon | Owner's Manual - Page 303
fluid reservoir. The fluid level should be above MIN. If it is not have your brake system checked to see if there is a leak. Always clean the brake fluid reservoir cap and the area around the cap before removing it. This will help keep dirt from entering the reservoir. {CAUTION: With the wrong kind - 2004 GMC Canyon | Owner's Manual - Page 304
accident. When you hear the brake wear warning sound, have your vehicle serviced. Notice: Continuing to drive with worn-out brake pads could result in costly brake repair. Some driving conditions or climates may cause a brake squeal when the brakes are first applied or lightly applied. This does not - 2004 GMC Canyon | Owner's Manual - Page 305
in the wrong replacement brake parts. Battery Your new vehicle comes with a maintenance free ACDelco® battery. When it is time for a new battery, get one that has the replacement number shown on the original battery's label. We recommend an ACDelco® battery. See Engine Compartment Overview on page - 2004 GMC Canyon | Owner's Manual - Page 306
-RDS Radios) on page 3-67 or Theft-Deterrent Feature (RDS Radios) on page 3-67. {CAUTION: Batteries can hurt you. They can be dangerous because: • They contain acid that can burn you. • They contain gas that can explode or ignite. • They contain enough electricity to burn you. If you do not follow - 2004 GMC Canyon | Owner's Manual - Page 307
the electrical systems. To avoid the possibility of the vehicles rolling, set the parking brake firmly on both vehicles involved in the jump start procedure. Put an automatic transmission in PARK (P) or a manual transmission in NEUTRAL before setting the parking brake. If you have a four-wheel-drive - 2004 GMC Canyon | Owner's Manual - Page 308
get medical help immediately. {CAUTION: Fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running. 5. Check that the jumper cables don't have loose or missing insulation. If they do, you could get a shock. The vehicles could be damaged - 2004 GMC Canyon | Owner's Manual - Page 309
end touch metal. Connect it to the positive (+) terminal of the good battery. Use a remote positive (+) terminal if the vehicle has one. 6. Connect the red positive (+) cable to the positive (+) terminal of the dead battery. Use a remote positive (+) terminal if the vehicle has one. 8. Now connect - 2004 GMC Canyon | Owner's Manual - Page 310
, electrical shorting may occur and damage the vehicle. The repairs would not be covered by your warranty. Remove the jumper cables in the correct order, making sure that the cables do not touch each other or other metal. A. Heavy, Unpainted Metal Engine Part B. Good Battery C. Dead Battery 5-46 - 2004 GMC Canyon | Owner's Manual - Page 311
with the good battery. 4. Disconnect the red positive (+) cable from the other vehicle. Rear Axle When to Check and Change Lubricant It is not necessary to regularly check rear axle fluid unless you suspect there is a leak or you hear an unusual noise. A fluid loss could indicate a problem. Have it - 2004 GMC Canyon | Owner's Manual - Page 312
, there are two additional systems that need lubrication. How to Check Lubricant Transfer Case When to Check Lubricant Refer to the Maintenance Schedule to determine how often to check the lubricant. See Additional Required Services on page 6-6. To get and accurate reading, the vehicle should - 2004 GMC Canyon | Owner's Manual - Page 313
Change Lubricant It is not necessary to regularly check front axle fluid unless you suspect there is a leak or you hear an unusual noise. A fluid loss could indicate a problem. Have it inspected and repaired. If the level is below the bottom of the filler plug hole, you may need to add some lubricant - 2004 GMC Canyon | Owner's Manual - Page 314
dealer's service department. Headlamps Composite Headlamp System Halogen Bulbs {CAUTION: Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions on the bulb package. A. Low-Beam Headlamp - 2004 GMC Canyon | Owner's Manual - Page 315
socket counterclockwise and pull it straight out of the headlamp housing. 4. Unplug the electrical connector from the old bulb. 5. Plug in the electrical connector to the new bulb. Use care not to touch the new bulb with your bare hand or anything damp or oily. 6. Place the connector with the new - 2004 GMC Canyon | Owner's Manual - Page 316
Front Turn Signal, Sidemarker and Daytime Running Lamps 3. Turn the bulb socket counterclockwise and remove it from the lamp housing. 4. Remove the old bulb from the bulb socket. 5. Insert the new bulb into the bulb socket. 6. Insert the bulb in the grille. 7. Place the inboard end of the turn - 2004 GMC Canyon | Owner's Manual - Page 317
tailgate latch and pull out the lamp assembly. 1. Remove the screws and lift off the lamp assembly. 2. Turn the bulb socket counterclockwise and remove it from the housing. 3. Pull the bulb straight out of the socket. 4. Insert the new bulb into the socket and press it in until tight. 5. Insert the - 2004 GMC Canyon | Owner's Manual - Page 318
/Taillamp B. Turn Signal C. Back-up Lamp Replacement Bulbs Exterior Lamp Center High-Mounted Stoplamp (CHMSL) Composite Headlamps Low-Beam High-Beam Headlamps, Sealed-Beam Park/ Front Turn Signal/Daytime Running Lamps (DRL) Parking Lamps (Inboard) Bulb Number 912 9006 9005 H6054 7157A 3157A 3057 - 2004 GMC Canyon | Owner's Manual - Page 319
Wiper Blade Check" under see Normal Maintenance Replacement Parts on page covered by your warranty. Do not allow the wiper blade arm to touch the windshield. 1. To remove the old wiper blades, lift the wiper arm until it locks into a vertical position. A. Blade Assembly B. Arm Assembly C. Locking - 2004 GMC Canyon | Owner's Manual - Page 320
way through the blade claws at the opposite end (B). The plastic caps (C) will be forced off as the insert is fully inserted. 5. Be sure that the notches are locked by the bottom claws. Make sure that all other claws are properly locked on both sides of the insert slots. 5-56 A. Claw in Notch - 2004 GMC Canyon | Owner's Manual - Page 321
tire warranty and where to obtain service, see your GM Warranty booklet for Manual. CAUTION: (Continued) • Underinflated tires pose the same danger as overloaded tires. The resulting accident could cause serious injury. Check friction. You could have an air-out and a serious accident. See "Loading Your - 2004 GMC Canyon | Owner's Manual - Page 322
Tire Sidewall Labeling Useful information about a tire is molded into its sidewall. The following illustrations are examples of a typical P-Metric and a compact spare tire sidewall. P-Metric Tire Example 5-58 - 2004 GMC Canyon | Owner's Manual - Page 323
type and service description. See the "Tire Size Code" illustration later in this section for more detail. (B) TPC Spec (Tire Performance Limit: Maximum load that can be carried and the maximum pressure needed to support that load. For information on recommended tire pressure see Inflation - Tire - 2004 GMC Canyon | Owner's Manual - Page 324
road tire has lost air code, tire size , and date the tire was manufactured. The TIN is molded onto both sides of the tire, although only one side may have the date of manufacture. (D) Maximum Cold Inflation Load Limit: Maximum load that can be carried and the maximum pressure needed to support - 2004 GMC Canyon | Owner's Manual - Page 325
of the wheel in inches. (F) Service Description: The service description indicates the load range and speed rating of a tire. The load index can range from 1 to 279. Speed ratings range from A to Z. Tire Size The following examples show the different parts of a tire size. Passenger (P-Metric - 2004 GMC Canyon | Owner's Manual - Page 326
square inch (psi) or kilopascal (kPa). Accessory Weight: This means the combined weight of optional accessories. Some examples of optional accessories are, automatic transmission, power steering, power brakes, power windows, power seats, and air conditioning. Aspect Ratio: The relationship of a tire - 2004 GMC Canyon | Owner's Manual - Page 327
metric unit for air pressure. There are 6.9 kPa's to one psi. Light Truck (LT-Metric) Tire: A tire used on light duty trucks and some multipurpose in which the ply cords that extend to the beads are laid at 90 degrees to the centerline of the tread. Rim: A metal support for a tire and upon which - 2004 GMC Canyon | Owner's Manual - Page 328
all right. It's not. If your tires don't have enough air (underinflation), you can get the following: Too much flexing Too much heat Tire overloading Bad wear Bad handling Bad fuel economy If your tires have too much air (overinflation), you can get the following: Unusual wear Bad handling - 2004 GMC Canyon | Owner's Manual - Page 329
it moves, use the wheel wrench to tighten the cable. See Changing a Flat Tire on page 5-74. The purpose of regular rotation is to achieve more uniform wear for all tires on the vehicle. The first rotation is the most important, see Scheduled Maintenance on page 6-4. How to Check Use a good quality - 2004 GMC Canyon | Owner's Manual - Page 330
spare tire that does not match your vehicle's road tires and wheels, in size and type, do not include the spare in the tire rotation. Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after a time. The wheel could come off and cause an accident. When - 2004 GMC Canyon | Owner's Manual - Page 331
time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch (1.6 mm) or less of tread remaining. Some commercial truck tires may not have treadwear or other damage that can't be repaired well because of the size or location of the damage. 5-67 - 2004 GMC Canyon | Owner's Manual - Page 332
other things during normal service on your vehicle. If your tires have an all-season tread design, the TPC number will be followed by an "MS" (for mud and snow). If you ever replace your tires with those not having a TPC Spec number, make sure they are the same size, load range, speed - 2004 GMC Canyon | Owner's Manual - Page 333
variations in driving habits, service practices and differences in road characteristics and climate. Treadwear the tires available on General Motors passenger cars and light trucks may vary with respect to these grades, they tire is based on straight-ahead braking traction tests, and does not include - 2004 GMC Canyon | Owner's Manual - Page 334
. Scheduled wheel alignment and wheel balancing road, your wheels may need to be rebalanced. Wheel Replacement Replace any wheel that is bent, cracked or badly rusted or corroded. If wheel nuts keep coming loose, the wheel, wheel bolts and wheel nuts should be replaced. If the wheel leaks air - 2004 GMC Canyon | Owner's Manual - Page 335
with new GM original equipment parts. This way, you will be sure to have the right wheel, wheel bolts and wheel nuts for your vehicle. Notice: The wrong wheel can also cause problems with bearing life, brake cooling, speedometer or odometer calibration, headlamp aim, bumper height, vehicle ground - 2004 GMC Canyon | Owner's Manual - Page 336
75R15, P265/75R15 or P235/50R17 size tires, do not use tire chains. They can damage your vehicle because there is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension or other vehicle parts. The area damaged by the tire - 2004 GMC Canyon | Owner's Manual - Page 337
properly. If air goes out : If a front tire fails, wheel firmly. Steer to maintain lane position, and then gently brake brake to a stop, well off the road if possible. {CAUTION: Lifting a vehicle and getting under it to do maintenance part shows how to use your jacking equipment to change a flat tire - 2004 GMC Canyon | Owner's Manual - Page 338
shift lever in PARK (P), or shift a manual transmission to FIRST (1) or REVERSE (R). 3. Turn off the engine and do not restart while the vehicle is raised. 4. Do not allow passengers to remain in the vehicle. CAUTION: (Continued) Put the wheel blocks at the front and rear of the tire farthest away - 2004 GMC Canyon | Owner's Manual - Page 339
are under the driver's side rear seat. For regular and extended cab vehicles the jack and wheel blocks are located under the cover at the center of the vehicle behind the front seats. 1. The vehicle will have a cover if it is an extended or regular cab. Crew Cab Regular and Extended Cab 5-75 - 2004 GMC Canyon | Owner's Manual - Page 340
2. Move the seats forward and turn the wing nut on the cover counterclockwise to remove it. For crew cab models, reach under the rear seat to access the jack and wheel blocks. To reinstall the jack and wheel block assembly in the mounting bracket, insert the tabs into the jack base by pushing the - 2004 GMC Canyon | Owner's Manual - Page 341
retainer and slide it up the cable so it can be pulled up through the wheel opening. 5. Put the spare tire near the flat tire. 2. Insert the hoist end (chiseled end) of the extension tool through the hole in the rear bumper and into the funnel-shaped guide. The chiseled end of the extension - 2004 GMC Canyon | Owner's Manual - Page 342
and Installing the Spare Tire Use the following pictures and instructions to remove the flat tire and raise the vehicle. 1. Remove the center cap by placing the chisel end of the wheel wrench (E) in the slot on the wheel and gently prying the cap out. The tools you will be using include the bottle - 2004 GMC Canyon | Owner's Manual - Page 343
2. Use the wheel wrench to loosen all the wheel nuts. Turn the wheel wrench counterclockwise to loosen the wheel nuts. Do not remove the wheel nuts yet. Front Location 5-79 - 2004 GMC Canyon | Owner's Manual - Page 344
Front Location Rear Location 3. Position the jack (A) under the vehicle as shown. 5-80 - 2004 GMC Canyon | Owner's Manual - Page 345
could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. {CAUTION: Front Location If the flat tire is on the front of the vehicle, position the jack to the rear of the front tire in the pocket off of the frame. If the flat tire is on - 2004 GMC Canyon | Owner's Manual - Page 346
sure the jack head is positioned so that the rear axle is resting securely between the grooves that are on the jack head. 5. Turn the wheel wrench clockwise to raise the vehicle. Raise the vehicle far enough off the ground so there is enough room for the spare tire to fit under - 2004 GMC Canyon | Owner's Manual - Page 347
{CAUTION: Rust or dirt on the wheel, or on the parts to which it is fastened, can make the wheel nuts become loose after a time. The wheel could come off and cause an accident. When you change a wheel, remove any rust or dirt from the places where the wheel attaches to the vehicle. In an emergency, - 2004 GMC Canyon | Owner's Manual - Page 348
Front Position Rear Position 9. Turn the wheel wrench counterclockwise to lower the vehicle. Lower the jack completely. 5-84 - 2004 GMC Canyon | Owner's Manual - Page 349
brake repairs, evenly tighten the wheel nuts in the proper sequence and to the proper torque specification. See "Capacities and Specifications" in the index for the wheel nut torque specification. When you reinstall the regular wheel and tire, you must also reinstall the center cap. Place the cap - 2004 GMC Canyon | Owner's Manual - Page 350
in the proper place. Notice: Storing an aluminum wheel with a flat tire under your vehicle for an extended period of time or with the valve stem pointing up may damage the wheel. Always stow the wheel with the valve stem pointing down and have the wheel/tire repaired as soon as possible. 1. Put the - 2004 GMC Canyon | Owner's Manual - Page 351
3. Attach the wheel wrench and extensions together. 2. Tilt the retainer downward and through the wheel opening. Make sure the retainer is fully seated across the underside of the wheel. 5-87 - 2004 GMC Canyon | Owner's Manual - Page 352
4. Insert the hoist end through the hole in the rear bumper and into the funnel-shaped guide. 5. Turn the wheel wrench clockwise to raise the tire part way up. Make sure the retainer is seated in the wheel opening and the valve stem is pointed down. 6. Raise the tire fully against the underside of - 2004 GMC Canyon | Owner's Manual - Page 353
the storage bag to the location under the front passenger's seat. Reinstall the jack and wheel blocks, be sure to install the wheel blocks first. Secure the items in the vehicle as shown. A. Bottle Jack B. Wheel Blocks C. Wing Nut Regular and Extended Cab Crew Cab A. Bottle Jack B. Wheel Blocks - 2004 GMC Canyon | Owner's Manual - Page 354
and follow the instructions listed below. 1. Check under the vehicle to see if the cable end fitting is visible. 2. If the cable end fitting is not visible proceed to Step 6. If it is visible, first try to tighten the cable by turning the wheel wrench clockwise until you hear two clicks or feel it - 2004 GMC Canyon | Owner's Manual - Page 355
cm) of cable is exposed. 6. Stand the wheel blocks on their shortest ends, with the backs facing each other. 8. Attach the jack handle, extension, and wheel wrench to the jack and place it (with the wheel blocks) under the vehicle towards the front of the rear bumper. Position the center lift point - 2004 GMC Canyon | Owner's Manual - Page 356
from under the spare tire with the other hand. If the spare tire is hanging from the cable, insert the hoist handle, extension and wheel wrench into the hoist shaft hole in the bumper and turn the wheel wrench counterclockwise to lower the spare the rest of the way. 11. Remove the jack handle - 2004 GMC Canyon | Owner's Manual - Page 357
vehicle through an automatic car wash with guide rails. The compact spare can get caught on the rails. That can damage the tire and wheel, and maybe other parts of your vehicle. 14. Tilt the tire retainer at the end of the cable and pull it through the wheel opening. Pull the tire out from - 2004 GMC Canyon | Owner's Manual - Page 358
your doors or windows when you are cleaning the inside. Never use these to clean your vehicle: Full-Size Spare Tire Your vehicle may be equipped with a full-size spare tire, which, when new, was fully inflated. A spare tire, whether compact-size or full-size, may lose air over time, so check its - 2004 GMC Canyon | Owner's Manual - Page 359
Do not use any of these unless this manual says you can. In many uses, these will damage your vehicle: Here are some cleaning tips: Alcohol Laundry Soap Bleach Reducing Agents Always read the instructions on the cleaner label. Clean up stains as soon as you can - before they set. - 2004 GMC Canyon | Owner's Manual - Page 360
Problems Stains caused by such things as catsup, coffee (black), egg, fruit, fruit juice, milk, soft drinks, vomit, urine and blood can be removed as follows: 1. Carefully scrape off excess stain, then sponge the soiled area with cool water. 2. If a stain remains, follow the cleaner instructions - 2004 GMC Canyon | Owner's Manual - Page 361
Surfaces Glass should be cleaned often. GM Glass Cleaner or a liquid household glass cleaner will remove normal tobacco smoke and dust films on interior glass. See Vehicle Care/Appearance Materials on page 5-102. Notice: If you use abrasive cleaners when cleaning glass surfaces on your vehicle, you - 2004 GMC Canyon | Owner's Manual - Page 362
finish on your vehicle provides beauty, depth of color, gloss retention and durability. Cleaning Exterior Lamps/Lenses Use only lukewarm or cold water, a soft cloth and a car washing soap to clean exterior lamps and lenses. Follow instructions under "Washing Your Vehicle." Washing Your Vehicle The - 2004 GMC Canyon | Owner's Manual - Page 363
ice melting agents, road oil and tar, nish looking new by keeping your vehicle garaged or covered whenever possible. Cleaning the Windshield and Wiper Blades Check the wiper blades and clean them as necessary; replace blades that look worn. Protecting Exterior Bright Metal Parts Bright metal parts - 2004 GMC Canyon | Owner's Manual - Page 364
brushes can also damage the surface of these wheels. Sheet Metal Damage If your vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection. Original manufacturer - 2004 GMC Canyon | Owner's Manual - Page 365
Underbody Maintenance Chemicals used for ice and snow removal and dust control can collect on the underbody. If these are not removed, corrosion and rust can develop on the underbody parts such as fuel lines, frame, floor pan and exhaust system even though they have corrosion protection. At least - 2004 GMC Canyon | Owner's Manual - Page 366
from chrome wheels and wire wheel covers. Removes dust, fingerprints, and surface contaminants. Spray on wipe off. Description Swirl Remover Polish Cleaner Wax Foaming Tire Shine Low Gloss Usage Removes swirl marks, fine scratches and other light surface contamination. Removes light scratches and - 2004 GMC Canyon | Owner's Manual - Page 367
an air bag system. Before attempting to add anything electrical to your vehicle, see Servicing Your Air Bag-Equipped Vehicle on page 1-72. Engine Identification The 8th character in your VIN is the engine code. This code will help you identify your engine, specifications and replacement parts. 5-103 - 2004 GMC Canyon | Owner's Manual - Page 368
-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure you replace a bad fuse with a new one of the identical size and rating. If you ever have a problem on the road and do not have a spare fuse, you can borrow one that has the same amperage. Just pick some feature - 2004 GMC Canyon | Owner's Manual - Page 369
of the engine compartment fuse block. To remove the cover, push in on the tab on the end of the cover and lift. To reinstall the cover, line up the tab and push down on the cover until the tab clicks into place. 2 5 8 9 10 11 12 13 14 Usage Brake Switch, Stoplamps Auxiliary Power 1 Air Conditioning - 2004 GMC Canyon | Owner's Manual - Page 370
Fuse 15 16 Usage Front Axle Actuator Antilock Brake System (ABS), ABS module, Four-Wheel Drive, Gravity Sensor Supplemental Inflatable Restraint System, Sensing and Diagnostic Module, Air Bag Off Switch Heated Seat Cruise Control Switch, Inside Rearview Mirror, Transfer Case Control Module, Brake - 2004 GMC Canyon | Owner's Manual - Page 371
Fuse, Wiper/Washer Switch Fuse, (Retained Accessory Power Mode) Ignition 3, Climate Control, Climate Control Head Fuse Run/Crank, Air Bag System Fuse, Cruise Control Fuse, Ignition Fuse, Back-Up Lamps, ABS Fuse, ERLS, Front Axle, PCM-1, Injectors Fuse Starter Relay (PCM Relay) Wiper 2 (High/Low - 2004 GMC Canyon | Owner's Manual - Page 372
page 6-13 for more information. Capacities and Specifications Capacities Application Air Conditioning Capacity Refrigerant R-134a Cooling System 2.8 L Engine 3.5 L Engine Differential Fluid Rear Axle Front Axle Engine Oil with Filter 2.8L 3.5L Fuel Tank English 1.6 lbs Metric 1.73 kg 10.4 quarts 10 - 2004 GMC Canyon | Owner's Manual - Page 373
Manual Wheel Nut Torque English 5.0 quarts 2.5 quarts 100 lb-ft Metric 4.7 L 2.4 L 140 Y All capacities are approximate. When adding, be sure to fill to the appropriate level or as recommended in this manual. Recheck fluid level after filling. Engine Specifications Type 2.8L LK5 3.5L L52 VIN Code - 2004 GMC Canyon | Owner's Manual - Page 374
✍ NOTES 5-110 - 2004 GMC Canyon | Owner's Manual - Page 375
6 Maintenance Schedule Owner Checks and Services ...6-9 At Each Fuel Fill ...6-9 At Least Once a Month ...6-9 At Least Once a Year ...6-10 Recommended Fluids and Lubricants ...6-13 Normal Maintenance Replacement Parts ...6-15 Engine Drive Belt Routing ...6-16 Maintenance Record ...6-17 Maintenance - 2004 GMC Canyon | Owner's Manual - Page 376
Maintenance Schedule Introduction Important: Keep engine oil at the proper level and change as recommended. Maintenance Requirements Notice: Maintenance intervals, checks, inspections, replacement parts and recommended fluids and lubricants as prescribed in this manual are necessary to keep your - 2004 GMC Canyon | Owner's Manual - Page 377
use their vehicles, maintenance needs vary. You may need more frequent checks and replacements. So road in the recommended manner. See Off-Road Driving with Your Four-Wheel-Drive Vehicle on page 4-15. • use the recommended fuel. See Gasoline Octane on page 5-5. The services in Scheduled Maintenance - 2004 GMC Canyon | Owner's Manual - Page 378
before you or anyone else drives the vehicle. We recommend the use of genuine GM parts. Scheduled Maintenance When the CHANGE OIL light comes on, it means that service is required for your vehicle. Have your vehicle serviced as soon as possible within the next 600 miles (1 000 km). It is possible - 2004 GMC Canyon | Owner's Manual - Page 379
year. Scheduled Maintenance Service Change engine oil and filter. Reset oil life system. See Engine Oil on page 5-13. An Emission Control Service. Visually check for any leaks or damage. See footnote (g). Inspect engine air cleaner filter. If necessary, replace filter. See Engine Air Cleaner/Filter on - 2004 GMC Canyon | Owner's Manual - Page 380
for each item. Additional Required Services Service and Miles (Kilometers) Inspect fuel system for damage or leaks. Replace fuel filter. Replace engine air cleaner filter. See Engine Air Cleaner/Filter on page 5-18. An Emission Control Service. Inspect exhaust system for loose or damaged components - 2004 GMC Canyon | Owner's Manual - Page 381
and rotors for surface condition. Inspect other brake parts, including drums, wheel cylinders, calipers, parking brake, etc. Check parking brake adjustment. (b) Visually inspect front and rear suspension and steering system for damaged, loose or missing parts or signs of wear. Inspect power steering - 2004 GMC Canyon | Owner's Manual - Page 382
(f) Lubricate all key lock cylinders, body door and fuel door hinges, latches and locks (including glove box and console doors), hood latch service. (i) Drain, flush and refill cooling system. See Engine Coolant on page 5-25 for what to use. Inspect hoses. Clean radiator, condenser, pressure cap - 2004 GMC Canyon | Owner's Manual - Page 383
Your GM Goodwrench dealer can assist you with these checks and services. Be sure any necessary repairs are completed at once Fuel Fill It is important to perform these underhood checks at each fuel fill. Engine Oil Level Check Check the engine oil level and add the proper oil if necessary. See Engine - 2004 GMC Canyon | Owner's Manual - Page 384
(N). If the starter works in any other position, contact your GM Goodwrench dealer for service. On manual transmission vehicles, put the shift lever in NEUTRAL (N), push the clutch down halfway and try to start the engine. The starter should work only when the clutch is pushed down all the way to - 2004 GMC Canyon | Owner's Manual - Page 385
Check While parked, and with the parking brake set, try to turn the ignition key to LOCK in each shift lever position. • With an automatic transmission, the key should turn to LOCK only when the shift lever is in PARK (P). The key should come out only in LOCK. • With a manual transmission, the key - 2004 GMC Canyon | Owner's Manual - Page 386
held by the parking brake only. • To check the PARK (P) mechanism's holding ability: With the engine running, shift to PARK (P). Then release the parking brake followed by the regular brake. Contact your GM Goodwrench dealer if service is required. Underbody Flushing Service At least every spring - 2004 GMC Canyon | Owner's Manual - Page 387
starburst symbol. To determine the proper viscosity for your vehicle's engine, see Engine Oil on page 5-13. Usage Parking Brake Cable Guides Fluid/Lubricant Chassis Lubricant (GM Part No. U.S. 12377985, in Canada 88901242) or lubricant meeting requirements of NLGI #2, Category LB or GC-LB. Power - 2004 GMC Canyon | Owner's Manual - Page 388
Rear Driveline Center Spline and Universal Joints Hood and Door Hinges, Body Door Hinge Pins, Liftgate Multi-Purpose Lubricant, Superlube Hinge and (GM Part No. U.S. 12346241, Linkage, in Canada 10953474). Folding Seats and Fuel Door Hinge Outer Tailgate Handle Pivot Points and Hinges Weatherstrip - 2004 GMC Canyon | Owner's Manual - Page 389
Normal Maintenance Replacement Parts Replacement parts identified below by name, part number, or specification can be obtained from your dealer. Part Transmission Filter Kit Automatic Engine Air Cleaner/Filter Engine Oil Filter 2.8 L Engine 3.5 L Engine Fuel Filter Spark Plugs Windshield Wiper Blades - 2004 GMC Canyon | Owner's Manual - Page 390
Engine Drive Belt Routing 6-16 - 2004 GMC Canyon | Owner's Manual - Page 391
Record After the scheduled services are performed, record the date, odometer reading, who performed the service and the type of services performed in the boxes provided. See Maintenance Requirements on page 6-2 in this section. Any additional information from Owner Checks and Services on page - 2004 GMC Canyon | Owner's Manual - Page 392
Maintenance Record (cont'd) Date Odometer Reading Serviced By Maintenance I or Maintenance II Services Performed 6-18 - 2004 GMC Canyon | Owner's Manual - Page 393
...7-10 Reporting Safety Defects to the Canadian Government ...7-11 Reporting Safety Defects to General Motors ...7-11 Service Publications Ordering Information ...7-11 Customer Assistance and Information ...7-2 Customer Satisfaction Procedure ...7-2 Online Owner Center ...7-3 Customer Assistance - 2004 GMC Canyon | Owner's Manual - Page 394
at that level. If the matter has already been reviewed with the sales, service or parts manager, contact the owner of the dealership or the • Dealership name and location • Vehicle delivery date and present mileage When contacting GMC, please remember that your concern will likely be resolved at a - 2004 GMC Canyon | Owner's Manual - Page 395
and the District of Columbia. Eligibility is limited by vehicle age, mileage and other factors. General Motors reserves the right to change eligibility 's manual. (United States only) • Keep track of your vehicle's service history and maintenance schedule. • Find GM dealers for service nationwide - 2004 GMC Canyon | Owner's Manual - Page 396
in Canada can dial 1-800-263-3830.) United States Pontiac-GMC Customer Assistance Center P.O. Box 33172 Detroit, MI 48232-5172 1-800-GMC-8782 (462-8782) 1-800-GMC-8583 (462-8583) (For Text Telephone devices (TTYs)) Roadside Assistance: 1-800-GMC-8782 (462-8782) Fax Number: 313-381-0022 From Puerto - 2004 GMC Canyon | Owner's Manual - Page 397
you up to $1,000 toward eligible aftermarket driver or passenger adaptive equipment you may require for your vehicle (hand controls, wheelchair/ scooter lifts, etc.). Mexico, Central America and Caribbean Islands/Countries (Except Puerto Rico and U.S. Virgin Islands) General Motors de Mexico, S. de - 2004 GMC Canyon | Owner's Manual - Page 398
will explain any payment obligations you might incur. • Fuel Delivery: Delivery of enough fuel ($5 maximum) for the customer to get to the nearest service station. • Lock-out Service (identification required): Replacement keys or locksmith service will be covered at no charge if you are unable to - 2004 GMC Canyon | Owner's Manual - Page 399
telephone number Telephone number of your location Location of the vehicle Model, year, color, and license plate number Mileage, Vehicle Identification Number, and delivery date of the vehicle Courtesy Transportation GMC has always exemplified quality and value in its offering of motor vehicles - 2004 GMC Canyon | Owner's Manual - Page 400
for reasonable fuel expenses (five day maximum) may be available. Claim amounts should reflect actual costs and be supported by original receipts. Transportation Options Warranty service can generally be completed while you wait. However, if you are unable to wait, GMC helps minimize your - 2004 GMC Canyon | Owner's Manual - Page 401
during the Bumper-to-Bumper warranty coverage period, but it is not part of the at participating dealers and all program options, such as shuttle service, may not be available at optimize fuel economy, to monitor conditions for air bag deployment and, if so equipped, to provide anti-lock braking and - 2004 GMC Canyon | Owner's Manual - Page 402
of police or similar government office, • as part of GM's defense of litigation through the discovery , NHTSA cannot become involved in individual problems between you, your dealer or General Motors check the OnStar® subscription service agreement or manual for information on its operations and - 2004 GMC Canyon | Owner's Manual - Page 403
Service Publications Ordering Information Service Manuals Service Manuals have the diagnosis and repair information on engines, transmission, axle, suspension, brakes, electrical, steering, body 1-800-GMC-8782 (1-800-462-8782), or write: Pontiac-GMC Customer Assistance Center P.O. Box 33172 Detroit - 2004 GMC Canyon | Owner's Manual - Page 404
The owner's manual will include the Maintenance Schedule for all models. In-Portfolio: Includes a Portfolio, Owner's Manual, and Warranty funds. Canadian residents are to make checks payable in U.S. funds. Current and Past Model Order Forms Service Publications are available for current and past - 2004 GMC Canyon | Owner's Manual - Page 405
A ABS (Anti-Lock Brake System) ...3-39 AC (Air Conditioning) OFF ...3-39 Accessory Power Outlets ...3-16 Adding Washer Fluid ...5-37 Additional Program Information ...7-9 Additives, Fuel ...5-6 Add-On Electrical Equipment ...5-103 Add-On Equipment ...4-58 Adjusting the Speakers (Balance/Fade) ...3- - 2004 GMC Canyon | Owner's Manual - Page 406
...Automatic Door Locks ...Automatic Headlamp System ...Automatic Transmission ...Fluid ...Operation ... 3-43 3-43 3-67 3-68 3-38 3-13 2-18 5-19 2-21 B Backing Up ...4-70 BATTERY ...3-39 Battery ...5-41 Battery Replacement ...2-6 Battery Run-Down Protection ...3-16 Battery Warning Light ...3-27 Bed - 2004 GMC Canyon | Owner's Manual - Page 407
, Tires ...5-72 CHANGE OIL ...3-40 Check Engine Light ...3-30 Check Engine Light ...3-30 Checking Brake Fluid ...5-39 Checking Coolant ...5-27 Checking Engine Oil ...5-13 Checking the Fluid Level ...5-21 Checking Things Under the Hood ...5-10 Checking Your Restraint Systems ...1-73 Chemical Paint - 2004 GMC Canyon | Owner's Manual - Page 408
-Deferrent ...2-14 Control of a Vehicle ...4-6 Coolant Engine Temperature Gage ...3-30 Heater, Engine ...2-20 Cooling System ...5-30 Crew Cab Models and Extended Cab Models with Rear Seats ...1-51, 1-58 Cruise Control ...3-9 Cruise Control Light ...3-35 Cupholder(s) ...2-42 Current and Past Model - 2004 GMC Canyon | Owner's Manual - Page 409
...3-33 ENG (Engine) HOT ...3-40 Engine Air Cleaner/Filter ...5-18 Battery ...5-41 Check and Service Engine Soon Light ...3-30 Coolant ...5-25 Coolant Heater ...2-20 Coolant Temperature Gage ...3-30 Drive Belt Routing ...6-16 Engine Compartment Overview ...5-12 Exhaust ...2-34 Fan Noise ...5-35 Oil - 2004 GMC Canyon | Owner's Manual - Page 410
Event Data Recorders (EDR) ...7-9 Exit Lighting ...3-16 Express Down Windows ...2-13 Extender, Safety Belt ...1-30 Exterior Lamps ...3-12 F Fan Knob ...3-18 Filter Engine Air Cleaner ...5-18 Finding a Program Type (PTY) Station ...3-50, 3-59 Finding a Station ...3-44, 3-48, 3-57 Finish Care ...5-98 - 2004 GMC Canyon | Owner's Manual - Page 411
to Add Fluid ...5-22, 5-23 How to Check ...5-20, 5-22, 5-65 How to Check and Add Fluid ...5-24 How to Check Lubricant ...5-47, 5-49 How to Check Power Steering Fluid ...5-36 How to Inspect the Engine Air Cleaner/Filter ...5-18 How to Use This Manual ...ii How to Wear Safety Belts Properly ...1-16 - 2004 GMC Canyon | Owner's Manual - Page 412
...1-8 Leaving Your Vehicle ...2-10 Leaving Your Vehicle With the Engine Running ...2-31 Light Air Bag Off ...3-26 Air Bag Readiness ...3-25 L Light (cont.) Anti-Lock Brake System Warning ...3-29 Battery Warning ...3-27 Brake System Warning ...3-28 Cruise Control ...3-35 Daytime Running Lamps - 2004 GMC Canyon | Owner's Manual - Page 413
Replacement Parts ...6-15 Owner Checks and Services ...6-9 Recommended Fluids and Lubricants ...6-13 Scheduled Maintenance ...6-4 Using Your ...6-3 Your Vehicle and the Environment ...6-2 Maintenance When Trailer Towing ...4-72 Making Turns ...4-70 Malfunction Indicator Light ...3-30 Manual Lumbar - 2004 GMC Canyon | Owner's Manual - Page 414
Your All-Wheel-Drive Vehicle Off Paved Roads ...4-15 Other Warning Devices ...3-4 Outlet Adjustment ...3-21 Outside Convex Mirror ...2-40 Manual Mirrors ...2-39 Power Mirrors ...2-40 Owner Checks and Services ...6-9 Owners, Canadian ...ii Owner's Information ...7-12 P PARK BRK (Brake) ...3-41 Park - 2004 GMC Canyon | Owner's Manual - Page 415
Cab Models without Rear Seats ...3-26, 1-48, 1-54, 1-70 Remote Keyless Entry System ...2-4 Remote Keyless Entry System, Operation ...2-5 Removing the Flat Tire and Installing the Spare Tire ...5-78 Removing the Spare Tire and Tools ...5-75 Replacement Bulbs ...5-54 Replacing Brake System Parts - 2004 GMC Canyon | Owner's Manual - Page 416
74 Restraint Systems Checking ...1-73 Replacing Parts ...1-74 Retained Accessory Power (RAP) ...2-18 Right Front Passenger Position, Safety Belts ...1-24 Roadside Assistance Program ...7-6 Rocking Your Vehicle To Get It Out ...4-45 Routing, Engine Drive Belt ...6-16 Running Your Engine While You Are - 2004 GMC Canyon | Owner's Manual - Page 417
SERV (Service) 4WD (Four-Wheel Drive) ...3-41 SERV VEH (Service Vehicle) ...3-42 Service ...5-3 Adding Equipment to the Outside of Your Vehicle ...5-4 Doing Your Own Work ...5-4 Engine Soon Light ...3-30 Publications Ordering Information ...7-11 Service Bulletins ...7-11 Service Manuals ...7-11 - 2004 GMC Canyon | Owner's Manual - Page 418
59 Trailer Brakes ...4-69 Transfer Case ...5-48 Transmission Fluid, Automatic ...5-19 Fluid, Manual ...5-22 Up-Shift Light ...3-28 Transmission Operation, Automatic ...2-21 Transmission Operation, Manual ...2-24 Transmission, Transaxle, Transfer Case Unit Repair Manual ...7-11 Transportation Options - 2004 GMC Canyon | Owner's Manual - Page 419
Trip Odometer ...3-24 Truck-Camper Loading Information ...7-4 Up-Shift Light ...2-25, 3-28 Used Replacement Wheels ...5-71 Using Service Parts Identification Label ...5-103 Vehicle Storage ...5-42 Ventilation Adjustment ...3-21 Visors ...2-14 W Warning Lights Engine Oil to Use ...5-14 V Vehicle - 2004 GMC Canyon | Owner's Manual - Page 420
Oil (GM Oil Life System) ...When to Check ...5-22, When to Check and Change ...When to Check and Change Lubricant ...5-47, When to Check and What to Use ...When to Check Power Steering Fluid ...When to Inspect the Engine Air Cleaner/Filter ...When You Are Ready to Leave After Parking on a Hill