2006 GMC Yukon Owner's Manual - Page 159

Easy Exit Seat The controls for this memory function are located on the driver's door. To repeat the procedure for a second driver, follow the preceding steps, but press the other numbered memory control button. To use the seat exit position, do one of the following: B (Easy Exit Seat): This button is used to program and recall the desired driver's seat position when exiting or entering the vehicle. The seat position can be saved for up to two drivers. To store the seat exit position, do the following: 1. Press and release the 1 or 2 button. The seat will move to the stored memory position. 2. Adjust the seat to the desired exit position. 3. Press and hold the exit button of the memory control for three seconds. A double chime will sound to let you know that the position has been stored for the selected button 1 or 2. • Press the exit button on the memory control. • If this feature is activated in the Driver Information Center (DIC), removing the key from the ignition will move the seat to the exit position. See "Easy Exit Seat" under DIC Vehicle Customization on page 3-67 for more information on activating this feature in the DIC. 2-63