2006 GMC Yukon Owner's Manual - Page 453

On the regular models, the equipment is located on the driver's side of the vehicle, behind the left trim panel in the rear of the vehicle. Unlatch the release lever to open the trim panel door. Skip the first step and follow the last three. On the extended models, the equipment you will need is under the storage tray on the driver's side of the vehicle, in the trim panel. 1. Remove the tray to access the tools. 2. Remove the wing nut used to retain the tool kit by turning it counterclockwise. 3. Turn the knob on the jack counterclockwise to release the jack from its holder and to lower the jack head. 4. Remove the wheel blocks and the wheel block retainer by turning the wing nut counterclockwise. You will use the jack handle extensions and the wheel wrench to remove the underbody-mounted spare tire. G. Hoist Shaft A. Spare Tire (Valve Stem Access Hole Pointed Down) H. Wheel Wrench B. Hoist Assembly I. Jack Handle C. Hoist Cable Extensions D. Tire Retainer J. Spare Tire Lock E. Hoist Shaft (If Equipped) F. Hoist End of Extension Tool 1. Open the spare tire lock cover on the bumper and use the ignition key to remove the lock if your vehicle is equipped with a spare tire lock (J). 5-79