2010 GMC Canyon Extended Cab Owner's Manual - Page 139

4. Shift the transfer case to Two-Wheel High. 5. Press and hold the Two-Wheel High and Four-Wheel Low buttons at the same time for 10 seconds. The N (Neutral) light will come on when the transfer case shift to N (Neutral) is complete. 6. Press and hold the regular brake pedal and shift the transmission to R (Reverse) for one second, then shift the transmission to D (Drive) for one second, or 1 (First) for vehicles with manual transmissions, and let out the clutch to insure the transfer case is in N (Neutral). If the transfer case is not in N (Neutral), repeat this procedure starting at Step 3. 7. Turn the engine off by turning the key to ACC/ACCESSORY. 8. Place the transmission shift lever in P (Park), or 1 (First) for vehicles that have a manual transmission. 9. Turn the ignition to LOCK/OFF. Shifting Out of Neutral After towing the vehicle, you will have to shift out of N (Neutral) in order to drive. To shift out of N (Neutral), do the following: 1. Set the parking brake and apply the regular brake pedal. 2. Start a vehicle with an automatic transmission in P (Park). Use 1 (First) for vehicles with a manual transmission. 3. Shift the transmission to N (Neutral), or press the clutch pedal for vehicles with a manual transmission. 4. Press the button for the desired transfer case shift position (Two-Wheel High, Four-Wheel High, or Four-Wheel Low). 5. After the transfer case has shifted out of N (Neutral), the indicator light will go out. 6. Release the parking brake. 7. Shift the transmission to the desired position. 3-29