2010 GMC Canyon Extended Cab Owner's Manual - Page 399

2010 GMC Canyon Extended Cab Manual

Page 399 highlights

Rotation of New Tires To maintain ride, handling, and performance of the vehicle, it is important that the first rotation service for new tires be performed when they have 8 000 to 13 000 km (5,000 to 8,000 miles). See Tire Inspection and Rotation on page 6-71. When the Change Oil message displays, certain services, checks, and inspections are required. The services described for Maintenance I should be performed at every engine oil change. The services described for Maintenance II should be performed when: • Maintenance I was performed the last time the engine oil was changed. Scheduled Maintenance When the Change Oil Message Displays Change engine oil and filter. See Engine Oil on page 6-15. An Emission Control Service. When the Change Oil message displays, service is required for the vehicle as soon as possible, within the next 1 000 km/600 miles. If driving under the best conditions, the engine oil life system might not indicate the need for vehicle service for more than a year. The engine oil and filter must be changed at least once a year and the oil life system must be reset. Your dealer/retailer has trained service technicians who will perform this work and reset the system. If the engine oil life system is reset accidentally, service the vehicle within 5 000 km/3,000 miles since the last service. Reset the oil life system whenever the oil is changed. See Engine Oil Life System on page 6-18. • It has been 10 months or more since the Change Oil message has displayed or since the last service. Maintenance I • Change engine oil and filter. See Engine Oil on page 6-15. An Emission Control Service. • Engine coolant level check. See Engine Coolant on page 6-29. • Windshield washer fluid level check. See Windshield Washer Fluid on page 6-38. • Tire inflation check. See Inflation - Tire Pressure on page 6-64. • Tire wear inspection. See Tire Inspection and Rotation on page 6-71. • Rotate tires. See Tire Inspection and Rotation on page 6-71. 7-3

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.