2010 GMC Canyon Extended Cab Owner's Manual - Page 143

The shift lock control system is designed to do the following: • Prevent the ignition key from being removed unless the shift lever is in P (Park). Parking the Vehicle (Manual Transmission) If the vehicle has a manual transmission, before you get out of the vehicle, move the shift lever into R (Reverse), and firmly apply the parking brake. Once the shift lever has been placed into R (Reverse) with the clutch pedal pressed in, turn the ignition key to LOCK/OFF, remove the key and release the clutch. If you are parking on a hill, or if the vehicle is pulling a trailer, see Towing a Trailer on page 5-48. • Prevent movement of the shift lever out of P (Park), unless the ignition is in ON/RUN and the brake pedal is applied. The shift lock control system is always functional except in the case of a dead battery or low voltage (less than 9 V) battery. If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. See Jump Starting on page 6-43 for more information. To shift out of P (Park) use the following: 1. Apply the brake pedal. 2. Move the shift lever to the desired position. If you still are unable to shift out of P (Park): 1. Ease the pressure on the shift lever. 2. While holding down the brake pedal, push the shift lever all the way into P (Park) 3. Move the shift lever to the desired position. If you are still having a problem shifting, then have the vehicle serviced. Parking Over Things That Burn { WARNING: Things that can burn could touch hot exhaust parts under the vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn. 3-33