2010 GMC Canyon Extended Cab Owner's Manual - Page 201

To adjust the balance or the fade to the middle position, push the AUDIO knob to select BAL or FADE/FAD, then push it again and hold it until one beep sounds. Finding a Program Type (PTY) Station (RDS and XM) To select and find a desired PTY perform the following: 1. Press the P-TYPE to activate program type select mode. P-TYPE or TYPE and a PTY displays. 2. Turn the P-TYPE knob again, to select a PTY. 3. Once the desired PTY displays, press the SEEK / TYPE button to select and to take you to the PTY's first station. 4. To go to another station within that PTY by pressing the SEEK / TYPE button twice to display the PTY and then go to another station. To cancel the seek, press the SEEK / TYPE button. This also exits the program type seek mode and returns to the last tuned station. If both PTY and TRAF (traffic) are on, the radio searches for stations with the selected PTY and traffic announcements. • For the AM-FM Radio, adjust balance or fade to the middle position by selecting BAL or FAD. Press and hold AUDIO for more than two seconds until a beep sounds. B (balance) and a zero or F (fade) and a zero displays. To adjust all tone and speaker controls to the middle position, push and hold the AUDIO knob when no tone or speaker control is displayed. ALL CENTERED displays and a beep sounds. • For the AM-FM Radio, adjust both tone controls and both speaker controls to the middle position by exiting out of audio mode. To do this, press any button for the radio to perform that function or wait five seconds for the display to return to time of day. Then press and hold AUDIO for more than two seconds until a beep sounds. CEN (center) displays. Fade might not be available if the vehicle is a regular cab model. 4-49