2010 GMC Savana 2500 Cargo Owner's Manual - Page 150

Turn Signal/Multifunction Lever Turn and Lane-Change Signals G : An arrow on the instrument panel cluster flashes in the direction of the turn or lane change. To signal a turn, move the lever all the way up or down. To signal a lane change, raise or lower the lever until the arrow starts to flash. The turn signal automatically flashes three times and if the tow-haul mode is active it flashes six times. Holding the turn signal lever for more than one second causes the turn signals to flash continually until the lever is released. The lever returns to its starting position when released. If after signaling a turn or lane change the arrow flashes rapidly or does not come on, a signal bulb may be burned out. Have the bulbs replaced. If the bulb is not burned out, check the fuse. See Fuses and Circuit Breakers on page 6-104. The lever on the left side of the steering column includes the following: G: Turn and Lane Change Signals. Headlamp High/Low-Beam Changer. 5 3: N: L: Windshield Wipers. Windshield Washer. Turn Signal On Chime If the turn signal is left on for more than1.2 km (3/4 mi), a chime sounds at each flash of the turn signal and the message TURN SIGNAL ON also appears in the Driver Information Center (DIC). See DIC Warnings and Messages on page 4-44. To turn off the chime and message, move the turn signal lever to the off position. Flash-to-Pass Feature. Information for these features is on the pages following. 4-4