2010 GMC Savana 2500 Cargo Owner's Manual - Page 315

11. Slide the taillamp slightly downward to reengage the lower clip. 12. Push the taillamp straight forward to reengage the studs. 13. Reinstall the two inboard nuts from the inside of the taillamp assembly. 1. Remove the two screws (C) securing the license plate bulb assembly (B). 2. Turn the bulb socket (A) counterclockwise and pull the bulb straight out of the socket. 3. Install the new bulb. 4. Reverse steps 1 and 2 to reinstall the license plate bulb assembly. License Plate Lamp To replace one of these bulbs: Replacement Bulbs Exterior Lamp Back-up, Rear Parking, Stoplamp, and Turn Signal Lamp Center High Mounted Stop Lamp (CHMSL) Front Parking and Turn Signal Lamp Front Sidemarker Lamp License Plate Lamp Headlamps Composite High-Beam Headlamp Composite Low-Beam Headlamp Sealed Beam Headlamp Bulb Number 3157 912 3157KX 194 194 9005 9006GS H6054 A. Bulb Socket B. License Plate Bulb Assembly C. Screws For replacement bulbs not listed here, contact your dealer/retailer. 6-53