2010 GMC Savana 2500 Cargo Owner's Manual - Page 31

5. Pull the seat rearward about 2 inches (5 cm) and then lift the seat from the floor rails. 6. Remove the seat from the vehicle. 7. For the first row rear seat, stow the safety belt latch by attaching the clip on the safety belt latch to the trim just inside the side door. Three Passenger Seat Shown The passenger side pin has a black cap with a white "R" marked on it. On a four passenger seat, each half of the seat has a set of pins. The driver side has a set marked "L", and the passenger side has a set marked "R". If the vehicle has floor mats, the pins will be located under a flap that has been cut into the mat. 3. Pull the pin handle up to disengage the pin from the retaining clip, then pull the pin out. 4. Repeat this procedure for the other pins. For the remaining rear seats, stow the safety belt latch plate on the clip at the window trim. 2-7