2011 GMC Canyon Regular Cab Owner's Manual - Page 117

Instruments and Controls Move the band to one of the following positions: 5-3 Windshield Washer Compass Calibration The compass may need calibration if: . 8 (Mist): Single wipe, move the band to z and then release it. Several wipes, hold the band on z longer. { WARNING In freezing weather, do not use your washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision. CAL is displayed while driving in the vehicle. After approximately five seconds, the display does not show a compass heading, N for North, for example, there may be a strong magnetic field interfering with the compass. Interference can be caused by a magnetic antenna mount, magnetic note pad holder, or a similar magnetic item. The compass does not display the correct heading and the compass zone variance is set correctly. . N (Adjustable Interval Wipes): For a delayed wiping cycle. Turn the band up for more frequent wipes or down for less frequent wipes. 6 (Low Speed): Slow wipes, turn the band to the first solid position past the delay settings. 1 (High Speed): Fast wipes, turn the band to the second solid position past the delay settings. 9 (Off): Turns the wipers off. Clear snow and ice from the wiper blades before using them. If frozen to the windshield, carefully loosen or thaw them. Damaged wiper blades should be replaced. Q L (Washer Fluid): Push the paddle on top of the multifunction lever to spray washer fluid on the windshield. The wipers will clear the window and then either stop or return to your preset speed. Compass Compass Operation Press Y b or depending on the mirror, press O once to turn the display on or off. .