2011 GMC Canyon Regular Cab Owner's Manual - Page 175

Infotainment System Digit Dial: This command allows a phone number to be dialed by entering the digits one at a time. Re‐dial: This command is used to dial the last number used on the cell phone. Using the "Dial" or "Call" Command 1. Press and release Using the "Digit Dial" Command The digit dial command allows a phone number to be dialed by entering the digits one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone. If an unwanted number is recognized by the system, say "Clear" at any time to clear the last number. To hear all of the numbers recognized by the system, say "Verify" at any time. 1. Press and release 2. Say "Digit Dial." 3. Say each digit, one at a time, that you want to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say "Dial." 7-25 Once connected, the person called will be heard through the audio speakers. Using the "Re‐dial" Command 1. Press and release g. 2. After the tone, say "Re‐dial." Once connected, the person called will be heard through the audio speakers. g. 2. Say "Dial" or "Call." 3. Say the entire number without pausing or say the name tag. Once connected, the person called will be heard through the audio speakers. Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. Press and release g to answer the call. g.