2011 GMC Canyon Regular Cab Owner's Manual - Page 177

Infotainment System Transferring a Call Audio can be transferred between the Bluetooth system and the cell phone. The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to ON/RUN. To Transfer Audio From the Bluetooth System to a Cell Phone During a call with the audio in the vehicle: 1. Press and release To Transfer Audio to the Bluetooth System From a Cell Phone During a call with the audio on the cell phone, press g for more than two seconds. The audio transfers to the vehicle. If the audio does not transfer to the vehicle, use the audio transfer feature on the cell phone. See your cell phone manufacturer's user guide for more information. 3. Say "Voice." . 7-27 The cell phone's normal prompt messages will go through its cycle according to the phone's operating instructions. Dual Tone Multi-Frequency (DTMF) Tones The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu driven phone system. Account numbers can also be stored for use. Sending a Number or Name Tag During a Call 1. Press g. The system responds "Ready", followed by a tone. 2. Say "Dial." 3. Say the number or name tag to send. Voice Pass-Thru Voice Pass‐Thru allows access to the voice recognition commands on the cell phone. See the cell phone manufacturer's user guide to see if the cell phone supports this feature. This feature can be used to verbally access contacts stored in the cell phone. 1. Press and release 2. Say "Bluetooth." g. 2. Say "Transfer Call." g.