2011 GMC Canyon Regular Cab Owner's Manual - Page 99

Seats and Restraints 3-55 { WARNING Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck and the safety belt continues to tighten. Buckle any unused safety belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, if your vehicle has one, after the child restraint has been installed. Notice: Do not let the LATCH attachments rub against the vehicle's safety belts. This may damage these parts. If necessary, move buckled safety belts to avoid rubbing the LATCH attachments. Do not fold the empty rear seat with a safety belt buckled. This could damage the safety belt or the seat. Unbuckle and return the safety belt to its stowed position, before folding the seat. Crew Cab - Rear Seat Seats (Extended Cab) on page 3‑10 or Rear Seats (Crew Cab) on page 3‑10. 2.2. Route the top tether according to your child restraint instructions and the following instructions: 1. Put the child restraint on the seat. 2. If the child restraint manufacturer's instructions recommends that the top tether be attached, attach the top tether to the top tether anchor (A). Refer to the child restraint instructions and the following steps: 2.1. Pull the seatback forward to access the top tether anchors (A). See Rear If the position you are using has a fixed headrest or head restraint and you are using a single tether, route the tether over the head restraint.