2012 GMC Canyon Owner's Manual - Page 139

Lighting If after signaling a turn or a lane change the arrows flash rapidly or do not come on, a signal bulb may be burned out. Have the bulbs replaced. If the bulb is not burned out, check the fuse. For bulb replacement, see Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps on page 10‑36. For a blown fuse or circuit breaker, see Fuses and Circuit Breakers on page 10‑38. Turn Signal On Chime If a turn signal is left on for more than 1.2 km (3/4 of a mile), a chime will sound at each flash of the turn signal and the message TURN SIGNAL will also appear in the DIC. To turn the chime and message off, move the turn signal lever to the off position. See "TURN SIGNAL" under Lamp Messages on page 5‑24 for more information. 6-5 Fog Lamps Exterior Cargo Lamps The cargo lamps (if equipped) can be used if more light is needed in the cargo area of the vehicle or in the top-box storage units. The fog lamp button is located near the exterior lamps control. # : For vehicles with fog lamps, press to turn the fog lamps on or off. An indicator light will turn on in the button when the fog lamps are on. The parking lamps or low‐beam headlamps must be on for the fog lamps to work. The fog lamps will go off whenever the high-beam headlamps come on. When the high beams go off, the fog lamps come on again. Some localities have laws that require the headlamps to be on along with the fog lamps. This button is located on the driver side of the instrument panel near the exterior lamp control.