2012 GMC Canyon Owner's Manual - Page 273

Vehicle Care 5. Insert the bulb socket into the lamp assembly and turn it clockwise to secure. 6. Reinstall the lamp assembly and tighten the screws. 4. Push the new bulb straight in until it clicks to secure it. 5. Reach under the rear bumper to reinstall the bulb socket into the connector. 6. Turn the bulb socket clockwise to secure it to the connector. Exterior Lamp Low-beam/ Daytime Running Lamp (DRL) Parking/Front Turn Signal Parking Lamp (Inboard) Stoplamp, Rear Turn Signal, Taillamp, and Back‐up Lamp 10-37 Bulb Number 9006 License Plate Lamp To replace one of these bulbs: Replacement Bulbs Exterior Lamp Cargo Lamp and Center High‐Mounted Stoplamp (CHMSL) License Plate Bulb Headlamps High-beam 9005 Bulb Number 912LL W5W LL 3757KA 3157A 3057 1. Reach under the rear bumper for the bulb socket. 2. Turn the bulb socket counterclockwise and pull the bulb socket out of the connector. 3. Pull the old bulb straight out from the bulb socket. For replacement bulbs not listed here, contact your dealer.