2012 GMC Canyon Owner's Manual - Page 166

7-24 Infotainment System Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. Press and release g to answer the call. To hear all of the numbers recognized by the system, say "Verify" at any time. 1. Press and release 2. Say "Digit Dial." 3. Say each digit, one at a time, that you want to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say "Dial." Once connected, the person called will be heard through the audio speakers. Using the "Re‐dial" Command 1. Press and release Three‐Way Calling Three‐Way Calling must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. 1. While on a call press and release g. 2. Say "Three‐way call." 3. Use the dial or call command to dial the number of the third party to be called. 4. Once the call is connected, press g to link all the callers together. g. Call Waiting Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. . Press and release g to answer an incoming call when another call is active. The original call is placed on hold. Press and release g again to return to the original call. To ignore the incoming call, continue with the original call with no action. . Ending a Call To end a call: 1. Press and release 2. Say "End Call." g. . 2. After the tone, say "Re‐dial." Once connected, the person called will be heard through the audio speakers. g.