2012 GMC Canyon Owner's Manual - Page 92

3-48 Seats and Restraints 3. Attach and tighten the lower attachments to the lower anchors. If the child restraint does not have lower attachments or the desired seating position does not have lower anchors, secure the child restraint with the top tether and the safety belts. Refer to your child restraint manufacturer instructions and the instructions in this manual. 3.1. Find the lower anchors for the desired seating position. 3.2. Attach and tighten the lower attachments on the child restraint to the lower anchors. 4. Tighten the top tether. 5. Before placing a child in the child restraint, make sure it is securely held in place. 1. Attach and tighten the lower attachments to the lower anchors. If the child restraint does not have lower To check, grasp the child restraint at the LATCH path and attempt to move it side to side and back and forth. There should be no more than 2.5 cm (1 in) of movement for proper installation. Extended Cab - Rear Seat If the child restraint has a dual tether, route the tether over the seatback. 2.3. Attach the top tether to the anchor (A). Make sure that you secure the top tether to the top tether anchor and not to the seatback latch (B). 2.4. Push rearward on the seatback until it locks into its upright position. Push and pull on the seatback to make sure it is secured properly.