2002 Honda Accord Owner's Manual - Page 302

Lights 3. Pull the bulb straight out of its socket. Push the new bulb in until it bottoms in the socket. 4. Turn on the parking lights and check that the new bulb is working. 5. Put the lens back on the bulb holder and push it until it latches. 6. Slide the left side of the light assembly into the hole. Push on the right side to latch the assembly into place. Replacing Bulbs in the Interior Lights The ceiling light, door light and vanity mirror light come apart the same way, but they do not use the same type of bulb. 1. Remove the lens by carefully prying on the edge of the lens with a fingernail file or a small flat-tip screwdriver. Do not pry on the edge of the housing around the lens. Door light: Pry on the top middle of the lens. Ceiling light: Pry on the front edge of the lens near both sides. Spotlight: Not available on U.S. DX and Value Package models Not available on U.S. DX and Value Package models CEILING LIGHT 2. Remove the bulb by pulling it straight out of its metal tabs. 3. Push the new bulb into the metal tabs. Snap the lens back in place. Pry on the front edge in front of both spotlights. 298 Maintenance