2002 Honda Accord Owner's Manual - Page 57

Indicator Lights Traction Control System (TCS) Indicator On all V6 models Door and Brake Lamp Monitor This indicator has three functions: 1. It comes on as a reminder that you have turned off the Traction Control System. 2. It flashes when the TCS is regulating wheelspin. 3. If it comes on and stays on when the Traction Control System is on, it indicates that there is a problem in the TCS. This light also comes on when you turn the ignition ON (II) and goes off after the engine starts. See page 222 for more information on the TCS. The appropriate light comes on in this display if the trunk or any door is not closed tightly. If a brake light does not work, the BRAKE LAMP indicator comes on when you push the brake pedal with the ignition switch ON (II). A burned out brake light is a hazard when drivers behind you cannot tell you are braking. Have your brake lights repaired right away. All the lights in the monitor display come on for a few seconds when you turn the ignition switch ON (II). Turn Signal and Hazard Warning Indicators The left or right turn signal light blinks when you signal a lane change or turn. If the light does not blink or blinks rapidly, it usually means one of the turn signal bulbs is burned out (see page 293 ). Replace the bulb as soon as possible, since other drivers cannot see that you are signalling. When you turn on the Hazard Warning switch, both turn signal lights blink. All turn signals on the outside of the car should flash. 58 Instruments and Controls