2005 Honda Accord Owner's Manual - Page 227
2005 Honda Accord Manual
Page 227 highlights
Lights 5. To remove the burned out bulb, push it in and turn it counterclockwise until it unlocks. 6. Install the new bulb and turn it clockwise to lock it in place. 7. Insert the socket into the headlight assembly. Turn it clockwise to lock it in place. 8. Test the new bulb to make sure it works. COVER SOCKETS Replacing Rear Bulbs (in Fenders) BULBS 4. Push a new bulb straight into the socket until it bottoms, and reinstall the socket into the light assembly by turning it clockwise until it locks. 5. Test the new bulb to make sure it works. 6. Reinstall the light assembly cover. 9. Put the inner fender cover in place. Install and lock each holding clip by pushing on the center. 1. Open the trunk. 2. Remove the light assembly cover by pulling its outside edge. 3. Remove the socket by turning it one-quarter turn counterclockwise, and pull the bulb straight out of its socket. 230