2007 Honda Accord Owner's Manual - Page 218
2007 Honda Accord Manual
Page 218 highlights
Lights Low Beam Headlight BULB HOLDING CLIPS TAB V6 models BULB 5. Push the electrical connector onto the bulb. 6. Turn on the headlights to test the new bulb. 7. Reinstall the air intake cover. Reinstall the two fasteners and secure them by pushing on the heads until they lock. 1. To change the passenger's side bulb, start the engine, turn the steering wheel all the way to the left, and turn off the engine. To change the driver's side bulb, turn the steering wheel to the right. 2. Use a flat-tipped screwdriver to remove the two holding clips from the inner fender. 3. Pull the inner fender cover away from the fender and bumper. 4. Remove the bulb by turning it approximately one-quarter turn counterclockwise. 5. Remove the electrical connector from the bulb by squeezing the connector to unlock the tab, then slide the connector off the bulb. 220