2008 Honda Accord Owner's Manual - Page 339
2008 Honda Accord Manual
Page 339 highlights
Main Menu Table Of Contents Lights Replacing a Fog Light Bulb If equipped Your vehicle uses halogen light bulbs. When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth. ELECTRICAL CONNECTOR TAB FASTENERS Halogen light bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter. The fog lights were properly aimed when your vehicle was new. If you regularly carry heavy items in the trunk or pull a trailer, readjustment may be required. Adjustment should be done by your dealer or other qualified technician. 1. Passenger's side Remove the three fasteners with a flat-tip screwdriver. Pull down the under cover from the bumper carefully. 2. Remove the electrical connector from the bulb by pushing on the tab to unlock it, then slide the connector off the bulb. 3. Remove the bulb by turning it about one-quarter turn counterclockwise. 336 2008 Accord Sedan