2009 Hummer H3T Alpha Owner's Manual - Page 281
2009 Hummer H3T Alpha Manual
Page 281 highlights
Service and Appearance Care CAUTION (Continued) 5-45 Tire Sidewall Labeling Useful information about a tire is molded into the sidewall. The following illustrations are examples of a typical P-Metric and a LT-Metric tire sidewall. • Underinflated tires pose the same danger as overloaded tires. The resulting accident could cause serious injury. Check all tires frequently to maintain the recommended pressure. Tire pressure should be checked when your vehicle's tires are cold. See Inflation - Tire Pressure on page 5-51. • Overinflated tires are more likely to be cut, punctured, or broken by a sudden impact - such as when you hit a pothole. Keep tires at the recommended pressure. • Worn, old tires can cause accidents. If the tire's tread is badly worn, or if your vehicle's tires have been damaged, replace them. aspect ratio, construction type, and service description. See the "Tire Size" illustration later in this section for more detail. (B) TPC Spec (Tire Performance Criteria Specification): Original equipment tires designed to GM's specific tire performance criteria have a TPC specification code molded onto the sidewall. GM's TPC specifications meet or exceed all federal safety guidelines. (C) DOT (Department of Transportation): The Department of Transportation (DOT) code indicates that the tire is in compliance with the U.S. Department of Transportation Motor Vehicle Safety Standards. Passenger (P-Metric) Tire (A) Tire Size: The tire size code is a combination of letters and numbers used to define a particular tire's width, height,