2009 Hummer H3T Alpha Owner's Manual - Page 317

Service and Appearance Care the center of the wheel. Tilt the tire/wheel retainer (B) down through the center wheel opening. 3. Make sure the tire/wheel retainer (B) is fully seated across the underside of the wheel. 5-81 7. Raise the tire fully against the underside of the vehicle by turning the wheel wrench clockwise until you hear two clicks or feel it skip twice. You cannot overtighten the cable. 5. Insert the hoist end of the extension tool (I) through the hoist shaft access ramp (H). 6. Raise the tire part upward. Make sure the tire/wheel retainer (B) is seated in the wheel opening. 4. Assembly the two jack handle extensions (F) and wheel wrench (G). 8. Push, pull (A) and then try to turn (B) the tire. If the tire moves, use the wheel wrench to tighten the cable.