2005 Jeep Grand Cherokee Owner Manual - Page 109

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 mirror, and the pedals stop moving. A delay of one second will occur before another recall can be selected. To Disable A Transmitter Linked to Memory 1. Turn the ignition switch to the OFF position and remove the key. 2. Press and release memory button number 1. The system will recall any memory settings stored in position 1. Wait for the system to complete the memory recall before continuing to step 3. 3. Press and release the memory SET (S) button located on the driver's door. 4. Within 5 seconds, press and release memory button 1 on the driver's door. 5. Within 5 seconds, press and release the "Unlock" button on the Remote Keyless Entry transmitter. To disable another transmitter linked to either memory position, repeat steps 1-5 for each transmitter. NOTE: Once programmed, all transmitters linked to memory can be easily enabled or disabled at one time. Refer to Remote Linked to Memory under ЉCustomer Programmable FeaturesЉ in the Electronic Vehicle Information Center (EVIC) for more information. 3