2011 Jeep Grand Cherokee Owner Manual - Page 144

142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 11. Select ЉRemote Linked to MemoryЉ in the Electronic Vehicle Information Center (EVIC) and enter ЉYesЉ. Refer to "Electronic Vehicle Information Center (EVIC)/ Customer-Programmable Features" in "Understanding Your Instrument Panel" for further information. To recall the memory setting for driver two, press MEMORY button number 2 on the driver's door, or the UNLOCK button on the RKE transmitter linked to memory position 2. A recall can be cancelled by pressing any of the 12. Repeat the above steps to set the next memory MEMORY buttons on the drivers door during a recall (S, position, using the other numbered memory button, or to 1, or 2). When a recall is cancelled, the driver's seat, driver's mirror and the pedals stop moving. A delay of link another RKE transmitter to memory. one second will occur before another recall can be Memory Position Recall selected. NOTE: The vehicle must be in PARK to recall memory To Disable A RKE Transmitter Linked To Memory positions. If a recall is attempted when the vehicle is not in PARK, a message will be displayed in the Electronic 1. Turn the ignition switch to the LOCK position, and remove the key. Vehicle Information Center (EVIC). To recall the memory settings for driver one, press MEMORY button number 1 on the driver's door, or the UNLOCK button on the RKE transmitter linked to memory position 1. 2. Press and release MEMORY button number 1. The system will recall any memory settings stored in position 1. Wait for the system to complete the memory recall before continuing to Step 3.