2011 Jeep Grand Cherokee Owner Manual - Page 191

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 WARNING! In the normal Cruise Control mode, the system will not react to vehicles ahead. In addition, the proximity warning does not activate and no alarm will sound even if you are too close to the vehicle ahead since the presence of the vehicle ahead nor the vehicle-tovehicle distance is detected. Be sure to maintain a safe distance between your vehicle and the vehicle ahead. Always be aware which mode is selected. To Vary The Speed Setting There are two ways to change the set speed: • Use the accelerator pedal to adjust the vehicle to the desired speed and press the SET - button. • Tap the RES + or SET - button to increase or decrease the set speed in 1 mph (1.6 km/h) increments respectively. Hold the RES + or SET - button for 5 mph (8 km/h) increments. To Cancel The system will disable normal Cruise Control without erasing the memory if: 3 To Set A Desired Speed When the vehicle reaches the speed desired, press the SET - button and release. The EVIC will display the set • You softly tap or depress the brake pedal. speed. • You press the CANCEL button. NOTE: You must observe the display when setting or changing speed, not the speedometer.