2015 Jeep Grand Cherokee User Guide SRT - Page 29

GETTING STARTED Memory Seat The memory seat feature allows you to set two different driver seating positions (excluding lumbar position), outside mirrors, radio station preset settings and tilt/telescoping steering column position (if equipped). The memory seat buttons are located on the driver's door panel. To set a memory position: 1. Cycle the vehicles ignition to the ON position. 2. Adjust all memory profile settings. 3. Press and release the S (SET) button. 4. Press and release the 1 or 2 button within five seconds. NOTE: Before programming your RKE transmitters you must select the "Personal Settings Linked To Key Fob" feature through the Uconnect® system. Refer to "Uconnect® Settings " in "Understanding Your Instrument Panel" in the Owner's Manual on the DVD for further details. To program a Key Fob to the memory position: 1. Cycle the vehicles ignition to the OFF position. 2. Select the desired memory profile 1 or 2. 3. Press and release the S (SET) button on the memory switch, then within five seconds press and release the 1 or 2 button accordingly. 4. Press and release the LOCK button on the RKE transmitter within 10 seconds. To recall the saved positions, press 1 or 2 on the memory switch or press UNLOCK on the programmed RKE transmitter. Easy Entry/Exit Feature The memory seat has an Easy Entry/Exit feature. This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. NOTE: The Easy Entry/Exit feature is not enabled when the vehicle is delivered from the factory. To enable (or later disable) this feature you must select "Easy Exit Seats" in "Engine Off Options" through the programmable features in the Uconnect® system. • Refer to "Uconnect® Customer Programmable Features" in "Electronics" of this User Guide. • For further details refer to "Uconnect® Settings" in "Understanding Your Instrument Panel" in the Owner's Manual on the DVD. Memory Seat Buttons 27