2001 Lincoln Town Car Owner Guide 4th Printing - Page 20
2001 Lincoln Town Car Manual
Page 20 highlights
Instrumentation Compass zone adjustment 1. Determine which magnetic zone you are in for your geographic location by referring to the zone map. 1 15 2. Locate the compass module and 2 14 the calibration button mounted on 3 the center rear view mirror post. 13 4 12 3. Turn ignition to the ON position. 11 4. Press and hold the CALIBRATION 5 6 10 BUTTON switch located on top of the compass module until the 7 8 9 message center display changes to show the current zone setting. 5. Release the CALIBRATION BUTTON, then slowly press down again. Press the CALIBRATION BUTTON repeatedly until the correct zone setting for your geographic location is displayed on the message center. 6. To exit the zone setting mode, release pressure from the switch for greater than ten seconds. Compass calibration adjustment Perform this adjustment in an open area free from steel structures and high voltage lines. For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) and make sure all vehicle doors are shut. 1. Start the vehicle. 2. Locate the compass module and the CALIBRATION BUTTON mounted on the center rear view mirror post. 20