2003 Lincoln LS Owner Guide 2nd Printing - Page 87

Lights Replacing HID headlamp bulb (if equipped) The low beam headlamps on your vehicle use a "high intensity discharge" source. These lamps operate at a high voltage. The bulb is NOT replaceable. When the bulb is burned out, the lamp assembly must be replaced by your dealer or a qualified technician. Replacing headlamp bulbs - highbeam 1. Remove the headlamp assembly as described under the Replacing exterior bulb header. 2. Remove the four T20 torx head screws holding the bulb retaining cover on. 3. Turn the bulb counterclockwise and remove it by pulling the bulb straight out. 4. Disconnect the electrical connector. Install the new bulb in reverse order, while also replacing the seal on the bulb retaining cover. The kits for replacement seals are avaliable at Lincoln or Ford dealers. Replacing the LED sidemarker 1. Remove the headlamp assembly as described under the Replacing exterior bulb header. 2. Remove the three T20 torx head screws holding the bulb retaining cover on. 3. Pull the LED assembly straight out and replace with a new assembly. Install the new assembly in reverse order, while also replacing the seal on the bulb retaining cover. The kits for replacement seals are avaliable at Lincoln or Ford dealers. 87