2006 Lincoln Zephyr Owner Guide 3rd Printing - Page 37

Lights 9. For ease of bulb socket installation into the lamp assembly, hold the bulb socket at 15 degrees clockwise from a vertical position. Using the 2 lead wires oriented exactly up to represent the vertical reference position. 10. From the 15 degree position rotate the bulb socket clockwise to a locked position. 11. Tuck the 2 lead wires into the lamp housing to assure that they are not pinched when installing the protective rubber cap. 12. Install the protective rubber cap to the housing circular ring by pushing and pressing it forward. 13. Re-apply pressure around the complete circular ring on the housing to make sure the protective rubber cap is completely seated. 14. Reconnect washer bottle filler neck snap strap by reversing step 3 (Passenger Side Only). 15. Reinstall the AirTube to the air filter assembly. (Driver's side only). 16. Reinstall the vertical shield to the bolster. (Driver's side only). 17. Turn the headlamps on and make sure they work properly. If the headlamp was correctly aligned before you changed the bulb, you should not need to align it again. Lowbeam bulb replacement 1. Make sure headlamp switch is in OFF position, then open the hood. 2. Remove the vertical shield from the bolster by disengaging the S-shaped clip and rotate it up in a clockwise direction. (Driver's side only) 3. Remove the AirTube from the air filter assembly. (Driver's side only). 37 2006 Zephyr (378) Owners Guide (post-2002-fmt) USA (fus)