2013 Lincoln MKS Owner Manual Printing 2 - Page 142

142 Universal Garage Door Opener Programming Note: Put a new battery in the hand-held transmitter. This will ensure quicker training and accurate transmission of the radio-frequency signal. 1. Switch the ignition on. 2. Hold the garage door hand-held transmitter 1-3 in. (2-8 cm) away from the button on the sun visor you want to program. Note: During programming, the hand-held transmitter may stop transmitting. If this occurs press and hold the function button while you press and release the hand-held transmitter every two seconds. The indicator light will flash slowly and then rapidly once the radio frequency signal is accepted. 3. Press and hold both the button on the sun visor you want to program and the hand-held transmitter button until the indicator light on the sun visor changes from flashing slowly to rapidly, then release. 4. Press and hold the function button you programmed for 5 seconds, then release. You may need to do this twice to activate the door. If your garage door does not operate, observe the indicator light. If the indicator light stays on, programming is complete. Press and release the programmed button to activate the door. If the indicator light on the sun visor flashes rapidly for two seconds then turns to a constant light, follow the steps below. Note: You may need a ladder to reach the unit and you may need to remove the cover or lamp lens. 1. Press the learn button on the garage door opener motor. Note: You will have 30 seconds to complete the next step. 2013 MKS (mks) Owners Guide gf, 2nd Printing USA (fus)